[asterisk-users] autoprovision 200+ linksys phones setup

[Rob Hillis]

Hi Eric,

You may want to contact me off-list - the company I work for offers a
product which aims to be a zero configuration service for Asterisk.  The
Linksys 942 and 962 phones /are/ supported.

Erick Perez wrote:
> Hi there,
> We have plans to install an office (not call center) with the following setup:
> 200 linksys 942 phones (sip + g711) on a LAN
> a server with a dual port E1 sangoma and a remora card with 4 fxo modules.
> So far when we want to setup a linksys phone, we need to use the http
> interface of each phone, disable/enable a lot of things and plug it
> into the network. this is not the best scenario for us but im sure
> there must be something we can do to speed things up.
>
> We are looking into a distribution (freepbx or pure asterisk,or
> something else) with links to documentation to enable autoprovisioning
> on the linksys phones.
> What we want to achieve is enabling the linksys phones to be plugged
> into the lan, grab a configuration from tftp or http and be assigned
> the next free extension. (fonality does something like that with
> polycoms)
>
> So far, the autoprovisioning links i've found talk about polycom
> phones and grandstream. but in this office (and country) linksys is
> better to get and much less expensive than polycom phones.
>
> Maybe some distro i haven't checked out that autoprovisions linksys 942?
> also, a guidance (howto, manual, web link) on autoprovisioning will be
> gladly welcomed.
>
> Thanks,
>
>
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080127/e9a25482/attachment.htm