[asterisk-users] Realtime problem host='dynamic' in 1.2.26.1

[Torbjörn Abrahamsson]

Hello!

We are using the 1.2 branch, and upgraded to 1.2.26.1. We ran into some 
problems when using realtime for peers. We connect the PBX to a sip peer 
at an ITSP, and when we try to dial the peer we get:

Jan 23 09:02:07 VERBOSE[2236] logger.c:     -- Executing 
Dial("SIP/dev02-08c36f28", "SIP/3246 at 989800-out||W") in new stack
Jan 23 09:02:07 DEBUG[2236] res_config_mysql.c: MySQL RealTime: 
Everything is fine.
Jan 23 09:02:07 DEBUG[2236] res_config_mysql.c: MySQL RealTime: Retrieve 
SQL: SELECT * FROM sippeers WHERE name = '989800-out' AND host = 'dynamic'
Jan 23 09:02:07 WARNING[2236] chan_sip.c: No such host: 989800-out
Jan 23 09:02:07 NOTICE[2236] app_dial.c: Unable to create channel of 
type 'SIP' (cause 3 - No route to destination)
Jan 23 09:02:07 VERBOSE[2236] logger.c:   == Everyone is busy/congested 
at this time (1:0/0/1)
Jan 23 09:02:07 DEBUG[2236] app_dial.c: Exiting with DIALSTATUS=CHANUNAVAIL.

I looked in the archives and found this thread:

http://lists.digium.com/pipermail/asterisk-users/2007-December/202616.html

Here the same problem is discussed for the 1.4 branch, and the result is 
that the problem should be fixed. But this is still a problem in 1.2 branch.

Will this be corrected in a new release, or is this not considered a 
security fix and hence ignored? Actually isn't this a fix for a security 
fix...

BR,
Torbjörn Abrahamsson