[asterisk-users] Qsig link

[Rob Hillis]

Pretty easy actually.

----------------- zaptel.conf ------------------------
span=1,0,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

---------------- zapata.conf ----------------------
usecallerid=yes
hidecallerid=no
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
relaxdtmf=yes
rxgain=-3.0
txgain=-6.0
busydetect=yes
busycount=8
immediate=no
switchtype=qsig
group=0
signalling=pri_net
channel => 1-15,17-31

You may need to set signalling to pri_cpe depending on how your Alcatel
is configured.  This is a working configuration from an Asterisk <-->
NEC NEAX7400 ICS system.  (You may not need busy detection - the only
reason I have it enabled is because there are a couple of analogue lines
connected to the NEC without hangup detection)


voip crazy wrote:
> Hello all,
>
> I need to conect an Asterisk with an Alcatel OmniPBX 4400 using an E1
> port.
> It is the first time I make this kind of connection and I do not know
> exactly how to get it working.
> Someone has experience with this kind of connection?
> Could you paste a zapata.con and zaptel.conf files with QSIG
> configuration?
> Any clue will be wellcomed.
>
> Thanks
>
> Voipcrazy
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080122/e5c85c66/attachment.htm