[asterisk-users] Device state of SIP doesn't change

[Atis Lezdins]

On 1/17/08, Mark Michelson <mmichelson at digium.com> wrote:
> Atis Lezdins wrote:
> > Hi,
> >
> > I'm wondering - why SIP device state doesn't get updated to anything
> > else, except Not In Use.
> >
> > For queue call (with Local channel) i get:
> > app_queue.c: Device 'SIP/21168' changed to state '1' (Not in use)
> > app_queue.c: Device 'SIP/21168' changed to state '1' (Not in use)
> > app_queue.c: The device state of this queue member, Agent/21168, is
> > still 'Not in Use' when it probably should not be! Please check
> > UPGRADE.txt for correct configuration settings.
> >
> > Of course, i checked UPGRADE.txt, and lot of other resources, enabled
> > few settings in sip.conf, but this still doesn't change.
> >
> > my sip.conf is:
> > [general]
> > port = 5060
> > bindaddr = 0.0.0.0
> > context = default-external
> > tos_sip=0x18
> > tos_audio=0x18
> > callerid = Unknown
> > dtmfmode=rfc2833
> > ignoreregexpire=yes
> >
> > limitonpeer=yes
> > notifyringing=yes
> > notifyhold=yes
> > allowsubscribe=yes
> > call-limit=1
> >
> > and the corresponding realtime entry is:
> > name: 21168
> > accountcode: NULL
> > amaflags: NULL
> > callgroup: NULL
> > callerid: device <21168>
> > canreinvite: no
> > context: default-sip
> > defaultip: NULL
> > dtmfmode: rfc2833
> > fromuser: NULL
> > fromdomain: NULL
> > fullcontact: NULL
> > host: dynamic
> > insecure: NULL
> > language: NULL
> > mailbox: 21168 at device
> > md5secret: NULL
> > nat: yes
> > deny: NULL
> > permit: NULL
> > mask: NULL
> > pickupgroup: NULL
> > port: 5061
> > qualify: no
> > restrictcid: NULL
> > rtptimeout: NULL
> > rtpholdtimeout: NULL
> > secret: xxx
> > type: friend
> > username: 21168
> > disallow:
> > allow: all
> > musiconhold: NULL
> > regseconds: 1200593168
> > ipaddr: xxx.xxx.xxx.xxx
> > regexten:
> > cancallforward: yes
> > setvar:
> >
> > Any help would be appreciated.
> >
> > Regards,
> > Atis
>
> The relevant portion of UPGRADE.txt mentions that a call-limit is necessary in
> order for SIP devices to report proper device state. I see in your sip.conf file
> that you have set call-limit in the general section. This setting, however, may
> only be set per peer (or user). Unfortunately, there's no warning message output
> if an unrecognized option is set in the general section.

Mark, thanks for pointing this out.

However, i was stuck without any success, until i tried adding my
phone in static config - then it magically worked. So, i could use
rtcachefriends=yes but that's something i would really like to avoid.
Is this considered a bug? There's nothing in docs saying that state
information is incompatible with Realtime.

Regards,
Atis



-- 
Atis Lezdins
VoIP Developer,
IQ Labs Inc.
atis at iq-labs.net
Skype: atis.lezdins
Cell Phone: +371 28806004
Work phone: +1 800 7502835