[asterisk-users] Asterisk Meetme & MeetMeAdmin cmd info-use

[amit salunkhe]

 Hi All

        I need to set my Asterisk conference such way that , during
confernce Admin Can kick 1 or all user , Same for mute fuction.As well as
Admin can increase or decrease conf & user volume.
for that i used MeetMeAdmin like this
                                                      exten =>
600,1,MeetMeAdmin(1111,ekKLmMNS,7010)    where 1111 is conf number & 7010 is
Admin user ityself

  Also for all other user i use  like this  with same conf number 1111
                                                      exten =>
601,1,MeetMe(1111|Mps)

when 2 user in conf & wait for Admin. then Admin Dail 600 but i found no
response when admin dail 600 its blank no response at console. All Dail Plan
config are ok. But for 600 its balnk.

what i need to do so can Admin Handle user who dail 601 & enter in same conf
room 1111.Means i want to controld all the users?
Also What is the use of user parameter in MeetMeAdmin cmd. is that normal
user or Admin Itself


      Plz give me the solution so i can handle such conf condition as Admin.


Regards
Amit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080117/48ab67ec/attachment.htm