[asterisk-users] Fwd: Trying to build MFC/R2

[Brian Hutchinson]

I saw that earlier today (I gave you some digs in the list for it earlier!)
and I've been doing what you say ...

Nice document!

On Jan 12, 2008 8:10 PM, Moises Silva <moises.silva at gmail.com> wrote:

> http://www.moythreads.com/unicall/mfcr2-asterisk-unicall-0.2-english.pdf
>
> On Jan 11, 2008 3:15 PM, Brian Hutchinson <b.hutchman at gmail.com> wrote:
> >
> > ---------- Forwarded message ----------
> > From: Brian Hutchinson <b.hutchman at gmail.com>
> > Date: Fri, 11 Jan 2008 12:22:09 -0500
> > Subject: Trying to build MFC/R2
> >
> >
> > Hi Moy,
> >
> > I downloaded your astunical-1.4.16 and have been studying it.
> >
> > I have a machine running the latest download of asterisk-1.4-17 and was
> > trying to figure out how to build MFC/R2 support into it.
> >
> > I merged your unicall specific changes from the Makefile in channels
> > directory to the new 1.4.17 channels Makefile (only like 4 changes).
> >
> > Next I went into each individual directory of your tarball and started
> > building.
> >
> > I did spandsp-0.0.4 first and that appeared to work OK.
> >
> > Next I did libsupertone-0.0.2 which again appeared to work OK.
> >
> > Next I did libunicall-0.0.3 which went OK.
> >
> > Next I did libmfcr2-0.0.3 and that didn't go OK.
> >
> > I captured the output of make and found that the build of mfcr2.c died
> > because it couldn't find the include file "linux/zaptel.h"
> >
> > I did a find on my system and saw where zaptel.h was in
> > /usr/include/zaptel/zaptel.h
> >
> > Once I fixed that ... I backed out to the main asterisk-1.4.17 directory
> and
> > did a make there and it looked like it build chan_unicall OK and make
> > install put the .so in the right place.
> >
> > I noticed that your tarball did not include a unicall.conf file.  Do you
> > have one?
> >
> > I'm using two Digium TE420B (with DSP).  Most of my trunks will be EURO
> ISDN
> > and two of them need to do R2 signalling.  How should my configs look?
>  Are
> > all trunks configured with unicall.conf now or do I still have to use
> > /etc/zaptel.conf?
> >
> > (time goes by)
> >
> > rebooted the box and now it seg faults over and over because I guess I
> > don't have the unicall cone set up right.
> >
> > I've left for the day and I'm sending this from a mobile device so I
> > hope it makes it and looks ok. I'm in Iraq so I didn't want to lose a
> > day due to the time difference.
> >
> >
> > Any help would be appreciated.
> >
> >
> > Regards,
> >
> > Brian
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>
> --
> "Within C++, there is a much smaller and cleaner language struggling
> to get out."
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080112/7ff979d9/attachment.htm