[asterisk-users] Fwd: Trying to build MFC/R2

[Brian Hutchinson]

---------- Forwarded message ----------
From: Brian Hutchinson <b.hutchman at gmail.com>
Date: Fri, 11 Jan 2008 12:22:09 -0500
Subject: Trying to build MFC/R2


Hi Moy,

I downloaded your astunical-1.4.16 and have been studying it.

I have a machine running the latest download of asterisk-1.4-17 and was
trying to figure out how to build MFC/R2 support into it.

I merged your unicall specific changes from the Makefile in channels
directory to the new 1.4.17 channels Makefile (only like 4 changes).

Next I went into each individual directory of your tarball and started
building.

I did spandsp-0.0.4 first and that appeared to work OK.

Next I did libsupertone-0.0.2 which again appeared to work OK.

Next I did libunicall-0.0.3 which went OK.

Next I did libmfcr2-0.0.3 and that didn't go OK.

I captured the output of make and found that the build of mfcr2.c died
because it couldn't find the include file "linux/zaptel.h"

I did a find on my system and saw where zaptel.h was in
/usr/include/zaptel/zaptel.h

Once I fixed that ... I backed out to the main asterisk-1.4.17 directory and
did a make there and it looked like it build chan_unicall OK and make
install put the .so in the right place.

I noticed that your tarball did not include a unicall.conf file.  Do you
have one?

I'm using two Digium TE420B (with DSP).  Most of my trunks will be EURO ISDN
and two of them need to do R2 signalling.  How should my configs look?  Are
all trunks configured with unicall.conf now or do I still have to use
/etc/zaptel.conf?

(time goes by)

rebooted the box and now it seg faults over and over because I guess I
don't have the unicall cone set up right.

I've left for the day and I'm sending this from a mobile device so I
hope it makes it and looks ok. I'm in Iraq so I didn't want to lose a
day due to the time difference.


Any help would be appreciated.


Regards,

Brian