[asterisk-users] :POSSIBLE SPAM: Re: conferencing help

[Nhadie]

hi dave thank you for the reply. i have loaded zap and using only 
ztdummy but still can't hear anything when i dial ti my conference, i 
think this explains it already. will a sangoma card do?

dave cantera wrote:
> nhadie,
> meetme requires a zaptel timing device... ztdummy is unreliable when 
> using meetme conferencing... I suggest you spend time elsewhere in * 
> until you get a digium tdm400 w/ or w/o any daughter modules...  you 
> just need the board for the timing device you don't actually need any 
> modules..... $195 for tdm400p + one mondule.. developers kit...
> daveC
> 
> Nhadie wrote:
>> hi shane,
>>
>> thanks for your reply. i actually tried 3 phones dialled to the 
>> conference, but cant here anything from those phones. i also enabled the 
>> usercount so i can hear something at least. but still no sound.
>> i'm using ztdummy, as i dont have a card yet.
>>
>> regards,
>> nhadie
>>
>> Shane D wrote:
>>   
>>> Wouldn't you need someone besides yourself in the conference?
>>>
>>> On 1/7/08, Nhadie <nhadie at tbgi.net.ph> wrote:
>>>     
>>>> Hi All,
>>>>
>>>> kind of need help on the conference module, i'm using freepbx and
>>>> enabled conferencing, i created a conference number, 6000. when i dial
>>>> to it, my phone says it is connected but i'm hearing nothing, maybe logs
>>>> below can help you.
>>>>
>>>> also, when i hang up the phone, the conference did not disconnect me.
>>>> how can i end a conference? thank you
>>>>
>>>>      -- Executing Macro("SIP/104-519e", "user-callerid|") in new stack
>>>>      -- Executing NoOp("SIP/104-519e", "user-callerid: device 104") in
>>>> new stack
>>>>      -- Executing Set("SIP/104-519e", "AMPUSER=104") in new stack
>>>>      -- Executing GotoIf("SIP/104-519e", "0?report") in new stack
>>>>      -- Executing GotoIf("SIP/104-519e", "0?start") in new stack
>>>>      -- Executing Set("SIP/104-519e", "REALCALLERIDNUM=104") in new stack
>>>>      -- Executing NoOp("SIP/104-519e", "REALCALLERIDNUM is 104") in new
>>>> stack
>>>>      -- Executing Set("SIP/104-519e", "AMPUSER=104") in new stack
>>>>      -- Executing Set("SIP/104-519e", "AMPUSERCIDNAME=104") in new stack
>>>>      -- Executing GotoIf("SIP/104-519e", "0?report") in new stack
>>>>      -- Executing Set("SIP/104-519e", "AMPUSERCID=104") in new stack
>>>>      -- Executing Set("SIP/104-519e", "CALLERID(all)="104" <104>") in
>>>> new stack
>>>>      -- Executing Set("SIP/104-519e", "REALCALLERIDNUM=104") in new stack
>>>>      -- Executing NoOp("SIP/104-519e", "TTL:  ARG1: ") in new stack
>>>>      -- Executing GotoIf("SIP/104-519e", "0?continue") in new stack
>>>>      -- Executing Set("SIP/104-519e", "__TTL=64") in new stack
>>>>      -- Executing GotoIf("SIP/104-519e", "1?continue") in new stack
>>>>      -- Goto (macro-user-callerid,s,23)
>>>>      -- Executing NoOp("SIP/104-519e", "Using CallerID "104" <104>") in
>>>> new stack
>>>>      -- Executing Set("SIP/104-519e", "MEETME_ROOMNUM=6000") in new stack
>>>>      -- Executing GotoIf("SIP/104-519e", "0?USER") in new stack
>>>>      -- Executing Answer("SIP/104-519e", "") in new stack
>>>>      -- Executing Wait("SIP/104-519e", "1") in new stack
>>>>      -- Executing Set("SIP/104-519e", "MEETME_OPTS=") in new stack
>>>>      -- Executing Goto("SIP/104-519e", "STARTMEETME|1") in new stack
>>>>      -- Goto (from-internal,STARTMEETME,1)
>>>>      -- Executing MeetMe("SIP/104-519e", "6000||") in new stack
>>>>
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>       
>>>     
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>   
>