[asterisk-users] :POSSIBLE SPAM: Re: :POSSIBLE SPAM: conferencing help

[dave cantera]

nhadie,
meetme requires a zaptel timing device... ztdummy is unreliable when 
using meetme conferencing... I suggest you spend time elsewhere in * 
until you get a digium tdm400 w/ or w/o any daughter modules...  you 
just need the board for the timing device you don't actually need any 
modules..... $195 for tdm400p + one mondule.. developers kit...
daveC

Nhadie wrote:
> hi shane,
>
> thanks for your reply. i actually tried 3 phones dialled to the 
> conference, but cant here anything from those phones. i also enabled the 
> usercount so i can hear something at least. but still no sound.
> i'm using ztdummy, as i dont have a card yet.
>
> regards,
> nhadie
>
> Shane D wrote:
>   
>> Wouldn't you need someone besides yourself in the conference?
>>
>> On 1/7/08, Nhadie <nhadie at tbgi.net.ph> wrote:
>>     
>>> Hi All,
>>>
>>> kind of need help on the conference module, i'm using freepbx and
>>> enabled conferencing, i created a conference number, 6000. when i dial
>>> to it, my phone says it is connected but i'm hearing nothing, maybe logs
>>> below can help you.
>>>
>>> also, when i hang up the phone, the conference did not disconnect me.
>>> how can i end a conference? thank you
>>>
>>>      -- Executing Macro("SIP/104-519e", "user-callerid|") in new stack
>>>      -- Executing NoOp("SIP/104-519e", "user-callerid: device 104") in
>>> new stack
>>>      -- Executing Set("SIP/104-519e", "AMPUSER=104") in new stack
>>>      -- Executing GotoIf("SIP/104-519e", "0?report") in new stack
>>>      -- Executing GotoIf("SIP/104-519e", "0?start") in new stack
>>>      -- Executing Set("SIP/104-519e", "REALCALLERIDNUM=104") in new stack
>>>      -- Executing NoOp("SIP/104-519e", "REALCALLERIDNUM is 104") in new
>>> stack
>>>      -- Executing Set("SIP/104-519e", "AMPUSER=104") in new stack
>>>      -- Executing Set("SIP/104-519e", "AMPUSERCIDNAME=104") in new stack
>>>      -- Executing GotoIf("SIP/104-519e", "0?report") in new stack
>>>      -- Executing Set("SIP/104-519e", "AMPUSERCID=104") in new stack
>>>      -- Executing Set("SIP/104-519e", "CALLERID(all)="104" <104>") in
>>> new stack
>>>      -- Executing Set("SIP/104-519e", "REALCALLERIDNUM=104") in new stack
>>>      -- Executing NoOp("SIP/104-519e", "TTL:  ARG1: ") in new stack
>>>      -- Executing GotoIf("SIP/104-519e", "0?continue") in new stack
>>>      -- Executing Set("SIP/104-519e", "__TTL=64") in new stack
>>>      -- Executing GotoIf("SIP/104-519e", "1?continue") in new stack
>>>      -- Goto (macro-user-callerid,s,23)
>>>      -- Executing NoOp("SIP/104-519e", "Using CallerID "104" <104>") in
>>> new stack
>>>      -- Executing Set("SIP/104-519e", "MEETME_ROOMNUM=6000") in new stack
>>>      -- Executing GotoIf("SIP/104-519e", "0?USER") in new stack
>>>      -- Executing Answer("SIP/104-519e", "") in new stack
>>>      -- Executing Wait("SIP/104-519e", "1") in new stack
>>>      -- Executing Set("SIP/104-519e", "MEETME_OPTS=") in new stack
>>>      -- Executing Goto("SIP/104-519e", "STARTMEETME|1") in new stack
>>>      -- Goto (from-internal,STARTMEETME,1)
>>>      -- Executing MeetMe("SIP/104-519e", "6000||") in new stack
>>>
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>       
>>     
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>   

-- 
My wife's sister is in California.  
I should buy her a Videophone2008!

Truly, The Next Best Thing to Being There!
--

WorldWideVideoPhones.com
856.380.0894