[asterisk-users] Incoming Calls

[Paulo Pinheiro]

Hi John, I have copied your changes in the Peer Details section of the
trunk set up...then I went ahead and added the DID number in the Income
Routes but still did not work. I tried the number alone and also tried
adding the + sign in front of it. Do you think we should have any
changes in the User Details section of the trunk set up?

 

Thanks much, 

Paulo

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jonn R
Taylor
Sent: Wednesday, January 02, 2008 12:26 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Incoming Calls

 

allow=ulaw&alaw

canreinvite=no

context=from-internal

disallow=all

dtmfmode=auto

host=xxx.xxx.xxx.xxx (IP address)

insecure=very

nat=no

qualify=no

tos=none

type=peer

 

This should work for you. They only accept g711 and g729. There service
only works with static ip's, so there is no auth used.

 

Jonn

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paulo
Pinheiro
Sent: Wednesday, January 02, 2008 11:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Incoming Calls

 

Hi Jose, I apologize for the lack of information..I am new to this...Let
me try to be more specific:

 

I've got Asterisk installed on Linux. I am using Elastix as the front
end to make changes in the system. 

 

Under the Trunk set up these are my setting for the Peer Details:

 

allow=ulaw&alaw&gsm

auth=plaintext

canreinvite=no

context=from-internal

disallow=all

dtmfmode=inband

fromdomain=xxx.xxx.xxx.xxx (IP address)

host=xxx.xxx.xxx.xxx (IP address)

insecure=very

nat=no

qualify=no

tos=none

type=friend

 

these are my settings for User Details:

 

allow=ulaw

canreinvite=no

context=from-sip-external

dtmfmode=rfc2833

host=xxx.xxx.xxx.xxx (IP addres)

nat=no

port=5060

reinvite=no

type=peer

 

When setting up the income routes if I place the phone number in the DID
Number field, when calling the number I receive a message stating the
phone number is not listed or out of service. When I leave the DID
Number field blank everything works because it does a catch all scenario
but that is not what I am looking for.

 

I have tried to place the phone number with +1 in front of it and still
does not work. Any way to help?

 

Thanks much, 

Paulo

 

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jose P.
Espinal
Sent: Wednesday, January 02, 2008 11:50 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Incoming Calls

 

Hi Mr. Paulo,

Could you please explain this situation in a more detailed way to see
how can we help you?

Regards,



Paulo Pinheiro wrote: 

I am having a problem that I would like to verify if someone could
help...I am using bandwith.com as my SIP TRUNK provider. When I place
the phone number in the DID number field ( using Elastix) it gives me an
error message stating the phone number I dialed is not in service. When
I leave the DID number and CLID number blanks it works fine. I really
need to have the system identifying multiple phone numbers ( multiple
trunks ) but I have not been able to do so. Would anyone be able to
help?

 

Thanks,

 

Paulo Pinheiro

President

Centurion Vision Inc.

www.centurionvision.com

Phone: 800.714.8776 ext.103

Fax: 561.338.0767

 

 
 
 
 
 


________________________________



 
 
 
 
 
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
 
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080102/1967c6e2/attachment.htm