[asterisk-users] Asterisk 1.4 Fax

[Jonn R Taylor]

If I had ANY failed faxes I would here about it. Iaxmodem creates a log of its own, so when I get a connection that fails hylafax sends the failure to me. One of the things that I found is you need to add nojitterbuffer to the iaxmodem config file, only use g711, and you must have QOS enabled on your switches and/or a traffic shaper on your internet connection.

I have a remote office that uses an IAX trunk and I can fax between these to offices over the internet. I have both app_txfax and app_rxfax also setup on asterisk and can use any of them. We also have 1 linksys ata that has a networked brother printer/fax and we can send faxes from it to any of the fax services on our network or any PSTN number.

Jonn

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug Lytle
Sent: Tuesday, January 01, 2008 2:56 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 1.4 Fax

Jonn R Taylor wrote:
> I have it setup to email me any failed fax connections. Most of the faxes come from remote offices, distributors and customers.
>   

Same here, but HylaFAX won't send you any logs of attempts that haven't 
at least negotiated a fax transmission.  Call comes in, tries to sync up 
several times and then hangs up.  It gets logged, but doesn't get sent 
to the FaxMaster.  You may want to check.

Doug

-- 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."



_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users