[asterisk-users] TDM400P dialout problem

[Anthony Messina]

Using asterisk 1.4.18 and zaptel 1.4.9 on x86_64, I am having trouble dialing 
out to the pstn. The call is initiated at Zap/1-1 and should exit via Zap/3. 
I get the following:

-- Starting simple switch on 'Zap/1-1'
-- Executing [2111 at internal:1] Dial("Zap/1-1", "Zap/3/8801234") in new stack
[Feb 25 02:36:59] DEBUG[7194]: chan_zap.c:1954 zt_call: Dialing '8801234'
[Feb 25 02:36:59] DEBUG[7194]: chan_zap.c:2030 zt_call: Deferring dialing...
-- Called 3/8801234
[Feb 25 02:37:00] WARNING[7194]: chan_zap.c:3835 zt_handle_event: Detected 
alarm on channel 3: No Alarm
-- Hungup 'Zap/3-1'
  == Everyone is busy/congested at this time (1:0/0/1)
[Feb 25 02:37:00] NOTICE[7082]: chan_zap.c:6678 handle_init_event: Alarm 
cleared on channel 3

So the call fails and if I weren't using a test extension:
exten => 2111,1,Dial(Zap/3/8801234)

it would proceed in the dialplan.

asterisk]# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER)

           1 WCTDM/0/0 FXOKS (In use)
           2 WCTDM/0/1
           3 WCTDM/0/2 FXSKS (In use)
           4 WCTDM/0/3


Where do I go with this?

-- 
Anthony -  http://messinet.com - http://messinet.com/~amessina/gallery
8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC B001 4A4E
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part.
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20080225/3b048c10/attachment.pgp