[asterisk-users] Dahdi and ztdummy

[David fire]

ok
dont pay attention to that file for now...
do you have any card on that machine? any digium card or any other brand?
or not?
if not the problem is that you dont need to load any module.... (just the
dummy one)
if you have any card you have a problem in the config.
David



2008/12/2 Mike <list at virtutel.ca>

> Thanks Joseph.  I went and read thos pages, nothing helps me.  As
> mentionned
> in my other post, I don`t have a /dev/dadhi file....I don`t know why it
> wasn`t created or where to go from here.
>
> Mike
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joseph L.
> Casale
> Sent: Tuesday, December 02, 2008 18:24
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] Dahdi and ztdummy
>
> >I did build dahdi before building asterisk, but that`s it.
>
> No problem. But what steps did you use? Did you edit *any* dahdi related
> configs? See the voip-info url below.
>
> >I find it hard to find any documentation referring to dadhi instead of
> zaptel.
>
> :) Yeah, it's not the most documented aspect of Asterisk, but there is
> enough for your need...
>
> >I have no Digium hardware, but I still need the ztdummy timer (or whatever
> it`s called now).  How do I get myself going?
>
> Well you need to check the README, for your application it has all you need
> to know:
> http://svn.digium.com/svn/dahdi/linux/tags/2.0.0/README
>
> Installation
> ~~~~~~~~~~~~
> Note: If using `sudo` to build/install, you may need to add /sbin to your
> PATH.
>
>  make
>  make install
>
> Note that you'll need the utilities provided in the package dahdi-tools
> to configure DAHDI devices on your system.
>
> At the bottom of that file, it points you to a source for making the
> transition when reading older docs:
> http://voip-info.org/wiki/view/DAHDI
>
> I suggest you pull in dahdi-linux-complate, run #make, #make install, #make
> config, then #chkconfig dahdi on (or your distro equiv) and the bare
> configs
> that get installed will allow all modules to load, see that there is no
> hardware and fall back to dahdi_dummy.
>
> Do an lsmod and look for something like so:
> [root at host ~]# lsmod | grep dahdi
> dahdi_dummy            38984  0
> dahdi                 231760  9
> dahdi_dummy,xpp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp
> crc_ccitt              35265  1 dahdi
>
> Also,
> [root at host ~]# cat /proc/dahdi/1
> Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER)
>
> Note that UPGRADE.txt suggests:
> http://svn.digium.com/svn/dahdi/linux/tags/2.0.0/UPGRADE.txt
> * This package no longer includes the 'menuselect' utility for
>  choosing which modules to build; all modules that can be built are
>  built automatically.
>
>
> HTH,
> jlc
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
(\__/)
(='.'=)This is Bunny. Copy and paste bunny into your
(")_(")signature to help him gain world domination.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081202/7eda0e9c/attachment-0001.htm