[asterisk-users] DUNDI Help

Wed Aug 27 03:56:59 CDT 2008

Hi Again,

Is there a way i can detect whether a user has been added into the regcontext?
Currently i'm seeing this and just gives a fast busy.

[Aug 27 16:44:46] WARNING[17402]: pbx.c:2483 __ast_pbx_run: Channel 'SIP/10..10.10.10-b63101d0' sent into invalid extension '141100' in context 'lookupdundi', but no invalid handler

can i detect it somehow, so i can inform user that the extensions is not available?

i have tried ChanIsAvail, but since i am using  realtime ChanIsAvail thinks it registered, since it really is registered on the other server. So it's trying to call it,  tries  it for 30 secs (i set it to timeout at 30),  after 30 secs then it will go to DUNDI/priv.  Is there a way that i can detect it first so it does not try to dial it on the local before askng dundi? thank you

regards,
Ron

--- On Tue, 8/26/08, Bruce Reeves <breeveslist at eusnetworks.com> wrote:
From: Bruce Reeves <breeveslist at eusnetworks.com>
Subject: Re: [asterisk-users] DUNDI Help
To: ronramos1004 at yahoo.com, "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Date: Tuesday, August 26, 2008, 8:16 PM

It is added when a phone registers, or re-registers. Depending on the
timing of the registrations and any restarts on the asterisk process
it may take some time for phones to re-register.

On Tue, Aug 26, 2008 at 2:10 PM, ronald ramos <ronramos1004 at yahoo.com>
wrote:
> Hi Bruce,
>
> my apologies, but the error was because of the key.
> i just run keys init on the CLI and it works,
>
> question on regcontext though, i set it to sipregistrations, how often
does
> an extension be added to the context sipregistrations and for how long
will
> it stay there? i'm looking at dialplan show sipregistration, sometimes
i
> only see one extension there. even though i know i have 4 ip phones
> registered to the asterisk.
>
> TIA
>
> Ron
>
>
> --- On Tue, 8/26/08, Bruce Reeves <breeveslist at eusnetworks.com>
wrote:
>
> From: Bruce Reeves <breeveslist at eusnetworks.com>
> Subject: Re: [asterisk-users] DUNDI Help
> To: ronramos1004 at yahoo.com, "Asterisk Users Mailing List -
Non-Commercial
> Discussion" <asterisk-users at lists.digium.com>
> Date: Tuesday, August 26, 2008, 6:23 PM
>
> Ron,
>
> What does the peers section in dundi.conf look like?
>
> On Tue, Aug 26, 2008 at 3:00 AM, ronald ramos
<ronramos1004 at yahoo.com>
> wrote:
>> Would like to try setting up dundi with 3-4 asterisk.
>> But for poc, i would like to try setting up dundi on between 2
asterisk.
>>
>> I copied the config from DUNDI enterprise SIP with no password. Only
thing
> i
>> changed is the part where i used regcontext.
>> on both boxes dundi.conf i have
>> [mapping]
>> priv => sipregistrations,0,SIP,${NUMBER}@10.10.10.XX,nopartial
>>
>> i can see both peers on each server:
>> CLI> dundi show  peers
>> EID                  Host                Model      AvgTime  Status
>> 00:8e:8c:8e:cb:53    10.10.10.XX  (S) Symmetric  Unavail  OK (1 ms)
>>
>> i can see my extension being added
>  on sipregistrations context
>> Added extension '136101' priority 1 to sipregistrations
>>
>> tried a dundi lookup but got no result
>> dundi lookup 136101 at priv
>> DUNDi lookup returned no results.
>> DUNDi lookup completed in 0 ms
>>
>> here's what's on extensions.conf
>>
>> ; Private DUNDi network
>> [dundi-priv-canonical]
>> ; Direct numbers
>>
>> [dundi-priv-customers]
>> ; If you are an ITSP or Reseller, list your customers here.
>>
>> [dundi-priv-via-pstn]
>> ; If you are freely delivering calls to the PSTN, list them here
>>
>> [dundi-priv-local]
>> include => dundi-priv-canonical
>> include => dundi-priv-customers
>> include => dundi-priv-via-pstn
>>
>> [dundi-priv-switch]
>> ; Just a wrapper for the switch
>> switch => DUNDi/priv
>>
>> [dundi-priv-lookup]
>> include =>
>  dundi-priv-local
>> include => dundi-priv-switch
>>
>> [macro-dundi-priv]
>> exten => s,1,Goto(${ARG1}|1)
>> include => dundi-priv-lookup
>>
>> [diallocal]
>> exten => _1XXXXX,1,Macro(dundi-priv|${EXTEN})
>>
>> i also tried dialing from my xlite:
>> [Aug 26 15:58:07]     -- Executing [136101 at diallocal:1]
>> Macro("SIP/138100-08269548", "dundi-priv|136101")
in
> new stack
>> [Aug 26 15:58:07]     -- Executing [s at macro-dundi-priv:1]
>> Goto("SIP/138100-08269548", "136101|1") in new
stack
>> [Aug 26 15:58:07]     -- Goto (macro-dundi-priv,136101,1)
>> [Aug 26 15:58:07]   == Auto fallthrough, channel
> 'SIP/138100-08269548'
>> status is 'UNKNOWN'
>>
>> any guess what's wrong? Thanks
>>
>> ron
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com
>  --
>>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>> Register Now: http://www.astricon.net
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
> --
> *****************************
> Bruce Reeves, dCAp
> EUS Networks
> Office: 212-624-5943
> Web: www.euscorp.com
> ****************************
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

-- 
*****************************
Bruce Reeves, dCAp
EUS Networks
Office: 212-624-5943
Web: www.euscorp.com
****************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080827/85cc85d2/attachment.htm 