[asterisk-users] OT - Which rackable case for mini-ITX boards ?

--[ UxBoD ]-- uxbod at splatnix.net
Sun Aug 24 11:38:26 CDT 2008


Gordon,

I have decided to ditch using Xen for Asterisk and build a separate server.  It will be used in the home office and this rack case looks great as I am going to get a small comms cabinet.  We will be using a TDM400P to bring PSTN to the server, plus we have a few SNOM M3 phones around the house and in our offices.

Would the CN1300 be capable for this ? and how much memory do you put in your servers ?  Is that case capable of taking two SATA drives which I can then mirror ? or do you save any VMs etc to a separate server ?

Regards,

-- 
--[ UxBoD ]--
// PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import"
// Fingerprint: F57A 0CBD DD19 79E9 1FCC A612 CB36 D89D 2C5A 3A84
// Keyserver: www.keyserver.net Key-ID: 0x2C5A3A84
// Phone: +44 845 869 2749 SIP Phone: uxbod at sip.splatnix.net

----- "Gordon Henderson" <gordon+asterisk at drogon.net> wrote:

> What processor do you need? ie. how many extensions/calls/PCI
> interface
> 
> cards - and additional back-end stuff like MySQL, AGI, etc.... ?
> 
> 
> 
> And what country are you in (although I'm guessing switzerland from
> those
> 
> domains).
> 
> 
> 
> I've built many with this combo: (from the UK, so you might be OK
> ordering
> 
> from .ch, or find a local supplier)
> 
> 
> 
> http://linitx.com/viewproduct.php?prodid=10902
> 
> 
> 
> + PSU + VIA CN1300 mobo + 1 PCI card...
> 
> 
> 
> 230mm deep, so fits into small office "comms cabinets" rather than
> needing
> 
> full racks, however I limit the CN1300's to 120 extensions - you might
> 
> need more, or have other stuff like MySQL, etc. running so might want
> a
> 
> beefier processor... (I don't run MySQL, or any other fancy AGI, etc.
> and
> 
> I do build a custom system, kernel & apps. targetted at the processor
> 
> which runs entirely in RAM)
> 
> 
> 
> I've also used this:
> 
> 
> 
>    http://linitx.com/viewproduct.php?prodid=10403
> 
> 
> 
> which can take 2 PCI cards via a riser, but I wasn't happy with it's
> 
> performance - tried both Digium TDM400 ISDN30 cards at the same time,
> but
> 
> the ISDN card kept on losing IRQs and due to time contraints, never
> had
> 
> the time to get to the bottom of it.
> 
> 
> 
> Gordon
> 
> 
> 
> _______________________________________________

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




More information about the asterisk-users mailing list