[asterisk-users] Unable to create ZAP Channel

Jay Ray jonty_11 at yahoo.com
Thu Aug 14 11:15:59 CDT 2008


*CLI> zap show status
No such command 'zap show status' (type 'help' for help)

//Doesnt look like a valid command
--------------------------------------------------------------------------

root]# ztcfg -vvvv

Zaptel Version: SVN-branch-1.4-r4477M
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels to configure.




--- On Thu, 8/14/08, Paul Hales <pdhales at optusnet.com.au> wrote:
From: Paul Hales <pdhales at optusnet.com.au>
Subject: Re: [asterisk-users] Unable to create ZAP Channel
To: jonty_11 at yahoo.com, "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Date: Thursday, August 14, 2008, 2:24 AM

Output of 'zap show status' (in asterisk)

Run 'ztcfg' from the command line and check that out too...

PaulH


Jay Ray wrote:
> Here it is:
>
> [asterisk]# asterisk -rx 'zap show channel 1'
> Unable to find given channel 1
> Verbosity is at least 20
>
>
> --- On *Thu, 8/14/08, Tzafrir Cohen /<tzafrir.cohen at xorcom.com>/*
wrote:
>
>     From: Tzafrir Cohen <tzafrir.cohen at xorcom.com>
>     Subject: Re: [asterisk-users] Unable to create ZAP Channel
>     To: asterisk-users at lists.digium.com
>     Date: Thursday, August 14, 2008, 1:16 AM
>
>     On Wed, Aug 13, 2008 at 09:51:07PM -0700, Jay Ray wrote:
>     > Her eis my call flow 
>     > 
>     > Sofphone --> Asterisk--> X100P card--> Home Phone line
>     > 
>     > Home phone line plugged in LINE port of the FXO ccard (2 port)
>     > 
>     > Here is the error I get 
>     > 
>     > 
>     > Aug 13 22:35:31
>      VERBOSE[8625]:     -- Executing
>     1;36;40mDial0;37;40m("1;35;40mSIP/xlite1-a0fb0;37;40m",
>     "1;35;40mZap/g1/30350612330;37;40m") in new stack
>     > Aug 13 22:35:31 NOTICE[8625]: Unable to create channel of type
>     'Zap'
>     > 
>     > ===============
>     > COnfigurations are:
>     > 
>     > /etc/asterisk/zapata.conf  
>     > 
>     > [channels]
>     > group=1
>     > stripmsd=0
>     > signalling=fxs_ks
>     > channel => 1
>     > 
>     > /etc/asterisk/extensions.conf 
>     > 
>     > [default]
>     > exten => _0X,1,Dial,Zap/g1/${EXTEN:1}
>
>     What is the output of:
>
>       asterisk -rx 'zap show channel 1'
>
>     ?
>
>     -- 
>                    Tzafrir Cohen
>     icq#16849755              jabber:tzafrir.cohen at xorcom.com
>     +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
>     http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
>     _______________________________________________
>     -- Bandwidth
>      and Colocation Provided by http://www.api-digital.com --
>
>     AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>     Register Now: http://www.astricon.net
>
>     asterisk-users mailing list
>     To UNSUBSCRIBE or update options visit:
>        http://lists.digium.com/mailman/listinfo/asterisk-users
>               
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users




      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080814/8fccb0b4/attachment.htm 


More information about the asterisk-users mailing list