[asterisk-users] Asterisk Realtime Unregister

[Pavel Jezek]

Nhadie wrote:
> I disabled logging of NOTIFY on the CLI and it does not show anymore, 
> however CPU is still very high, latency as well goes up when it is 
> trying to poke my phone here, my phone(SPA942) also keeps on rebooting
>
> is there a way to increase the time of sending the qualify? TIA
>   
you can try to use 'qualifyfreq' parametr in sip.conf (if you are using 
1.6 or trunk)


> regards
> nhadie
>
> Nhadie wrote:
>   
>> Thank you for your reply sir. I tried setting qualify=yes my CPU spiked 
>> to 113%
>>
>> i continuously see this on my CLI>
>>
>> Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 
>> handle_response_peerpoke: Peer '118555' is now Reachable. (388ms / 2000ms)
>> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 
>> handle_response_peerpoke: Peer '110100' is now Lagged. (2354ms / 2000ms)
>> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 
>> handle_response_peerpoke: Peer '118777' is now Reachable. (432ms / 2000ms)
>> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 
>> handle_response_peerpoke: Peer '118777' is now Reachable. (436ms / 2000ms)
>> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 
>> handle_response_peerpoke: Peer '118555' is now Reachable. (440ms / 2000ms)
>> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 
>> handle_response_peerpoke: Peer '118555' is now Reachable. (444ms / 2000ms)
>>
>> could that be the cause of high cpu? i'm logged in on the cli asterisk 
>> -vr, my verbosity is only set to 1. how come i keep on seeing the NOTICE?
>>
>> thanks again in advanced
>>
>> regards,
>> nhadie
>>
>>
>> Rob Hillis wrote:
>>     
>>> If a phone is unplugged, it's not likely to have time to send 
>>> notification of this to Asterisk before it powers off.  There's nothing 
>>> you can add to your dialplan to overcome this, however you *can* set the 
>>> "qualify" parameter within sip.conf (or it's equivalent realtime table) 
>>> to overcome this.
>>>
>>> See http://www.voip-info.org/wiki/view/Asterisk+sip+qualify for more 
>>> information.  Short version is that configuring a qualify interval is 
>>> the equivalent of setting up a heartbeat between Asterisk and registered 
>>> devices configured with a qualify interval.  If the heartbeat fails, the 
>>> phone's registration is suspended.
>>>
>>> Nhadie wrote:
>>>       
>>>> Hi,
>>>>
>>>> I'm running asterisk realtime, i had prob when a user does not 
>>>> unregister properly.
>>>>
>>>> I tested with SPA942 and a PAP2, when phone is registered, i call using 
>>>> the SPA using x-lite no problem, but when i unplugged the power, it does 
>>>> not unregister properly, so asterisk think SPA942 is still registered, 
>>>> when i call using x-lite, asterisk tries to call it.so it gets stuck at
>>>>
>>>> [Aug 11 21:37:31]     -- Called 102104
>>>>
>>>> until it reached the timed out i set in the dialplan which is 30 secs
>>>>
>>>> Dial(SIP/${EXTEN}|30|t|M(setmusiconhold,moh-${EXTEN}))
>>>>
>>>> is there something i can add on my dialplan to first detect that the 
>>>> user is not available, or maybe force unregister, anything that would 
>>>> not make my dialplan to wait for 30 secs.
>>>>
>>>> also i'm not using rtcachefriends, how would i know in the CLI which 
>>>> user is registered? i tried sip prune but it shows me nothing
>>>>
>>>> sip prune realtime peer all
>>>> No peers found to prune.
>>>>
>>>> anyone experienced this?
>>>>
>>>> thank you
>>>>
>>>> regards.
>>>> nhadie
>>>>
>>>> _______________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>>>> Register Now: http://www.astricon.net
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>> !DSPAM:48a0464541521298081403!
>>>>
>>>>
>>>>   
>>>>         
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>>> Register Now: http://www.astricon.net
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>>       
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>> Register Now: http://www.astricon.net
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>     
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>