[asterisk-users] DUNDi and SIP

[Jeremy Mann]

I have it working via IAX, when I try changing everything to SIP I can't specify a username and an extension, so it becomes useless.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bruce Reeves
Sent: Thursday, April 17, 2008 6:51 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DUNDi and SIP

Jeremy,

Here is a working sample to compare to. This is an IAX2 setup, but the
only difference is in the mapping change IAX2 to SIP. Notice the 4th
setting in the mapping? It defines to use the IAX2 peer "priv" with
the secret generated of the key defined in the peers section of
dundi.conf. When you look at the peer in iax.conf on the remote box,
there is no host entry and it uses dbsecret=dundi/secret, the

dundi.conf
priv => dundi-internal,0,IAX2,priv:${SECRET}@192.168.99.250/${NUMBER},nopartial

[00:19:66:1C:78:D5] ; Dev Box
model = symmetric
host = 192.168.99.252
inkey = eus
outkey = eus
include = priv
permit = priv
qualify = yes