[asterisk-users] wcfxo and X100P card won't play nice.

Brent Davidson brent at texascountrytitle.com
Wed Apr 16 09:44:25 CDT 2008


Alex Balashov wrote:
> Greetings,
>
> This may have already been asked many times, but I cannot seem to find a 
> satisfactory and consistent answer anywhere.
>
> I have an X100P card (from x100p.com) installed in a Dell PowerEdge 2850 
> or 2650 (cannot recall):
>
> 00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
> 00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
> 00:00.2 Host bridge: Broadcom CMIC-LE
> 00:04.0 Class ff00: Dell Embedded Remote Access or ERA/O
> 00:04.1 Class ff00: Dell Remote Access Card III
> 00:04.2 Class ff00: Dell Embedded Remote Access: BMC/SMIC device
> 00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
> 00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
> 00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
> 00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
> 00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
> 00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
> 00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
> 00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
> 00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
> 01:06.0 Communication controller: Motorola Wildcard X100P
> 03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 
> Gigabit Ethernet (rev 15)
> 03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 
> Gigabit Ethernet (rev 15)
> 04:08.0 PCI bridge: Intel Corporation 80303 I/O Processor PCI-to-PCI 
> Bridge (rev 01)
> 04:08.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller 
> 3/Di (rev 01)
>
> But, wcfxo won't recognise it:
>
> NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0
> Failed to initailize DAA, giving up...
> wcfxo: probe of 0000:01:06.0 failed with error -5
>
> This is running on a custom-compiled kernel 2.6.24.3 with Asterisk 
> 1.4.18 and Zaptel 1.4.10.
>
> Any ideas?
>
> -- Alex
>
>   
Is that a genuine X100P or a clone?  Looks like a modem that has been 
made to look like an X100P.

-Brent




More information about the asterisk-users mailing list