[asterisk-users] way to inquire status of T1 link

[linuxian iandsd]

with digium cards i would use:

#sudo asterisk -r
>
once inside cli :

dialer1*CLI> zap show status
> Description                         Alarms     IRQ        bpviol
> C4
> T2XXP (PCI) Card 0 Span 1     RED        0
> 0
> T2XXP (PCI) Card 0 Span 2     RED        0
> 0
> dialer1*CLI>
>

so RED is an ALARM
GREEN is OK

here this is a digium card woth 2 pri interfaces & i have unpluged them so
you see the RED alarm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080413/5e8b40f6/attachment.htm