[asterisk-users] exited non-zero on 'Zap/1-1' in macro ...

[Brian J. Murrell]

I have a macro which I call when I want to ring the house phones.  So
for example, when a Zap line rings it enters the dialplan in the
"inbound-pots" context which is as follows:

[inbound-pots]
exten => s,1,Set(CDR(accountcode)=...)
exten => s,n,Macro(check-incoming)
exten => s,n,Goto(inbound-house,s,1)

[inbound-house]
exten => s,1,Macro(dialhouse)
exten => s,n,Hangup

[macro-dialhouse]
; Do 'things' here when we want to dial the house,
;
exten => s,1,NoOp(${CALLERID(name)}|${CALLERID(num)}|${DATETIME}|${CALLERIDNUM}|${CALLERIDNAME})
exten => s,n,System(/usr/local/bin/callerid "${CALLERID(num)}" "${CALLERID(name)}")
exten => s,n,Dial(${HOUSE}&${OFFICE}&${BRIANEXTS},30,tw)
exten => s,n,Goto(s-${DIALSTATUS},1)
exten => s-ANSWER,1,Noop("ANSWERED")
exten => s-ANSWER,n,MacroExit()
exten => _s-,1,Goto(general-voicemail,s,1)
exten => h,1,Hangup
exten => i,1,Hangup

What happens on the console on every single call termination from the
Zap line is this:

    -- Executing [s at inbound-house:1] Macro("Zap/1-1", "dialhouse") in new stack
    -- Executing [s at macro-dialhouse:1] NoOp("Zap/1-1", "...|...|||") in new stack
    -- Executing [s at macro-dialhouse:2] System("Zap/1-1", "/usr/local/bin/callerid "..." "..."") in new stack
    -- Executing [s at macro-dialhouse:3] Dial("Zap/1-1", "SIP/house&SIP/brian&SIP/pc|30|tw") in new stack
    -- Called house
    -- Called brian
    -- Called pc
    -- SIP/house-08437510 is ringing
    -- SIP/pc-084937a0 is ringing
    -- Got SIP response 486 "Busy Here" back from 10.75.22.200
    -- SIP/brian-084953a0 is busy
    -- SIP/house-08437510 answered Zap/1-1
  == Spawn extension (macro-dialhouse, s, 3) exited non-zero on 'Zap/1-1' in macro 'dialhouse'
  == Spawn extension (macro-dialhouse, s, 3) exited non-zero on 'Zap/1-1'
    -- Executing [h at macro-dialhouse:1] Hangup("Zap/1-1", "") in new stack
  == Spawn extension (macro-dialhouse, h, 1) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'

So the question is why the "exited non-zero on 'Zap/1-1'" messages?  I'd
really like to get rid of them so that a non-zero exit is really
something bad to pay attention to.

b.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20080407/eb1c72de/attachment.pgp