[asterisk-users] Zaptel data mode not supported?

[Steve Totaro]

You need to have the kernel compiled specially for it to work.

Thanks,
Steve Totaro

On 4/5/08, Alex Kauffmann <akauffma at prodigy.net.mx> wrote:
> Hello:
>
> Have a TE110P laying around and decided to see if I could build a router
> around it.  I've tried compiling several versions of zaptel .1.4.x with
> the same results.  I checked the zaptel changelog and can't find
> anything about it no longer being supported (or that it ever was for
> that matter).
>
> ztcfg:
>
> Zaptel Configuration
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> Channel map:
> Channel 01: Network HDLC (Default) (Slaves: 01 02 03 04 05 06 07 08 09
> 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31)
> 31 channels configured.
> Changing signalling on channel 1 from Unused to Network HDLC
> ZT_CHANCONFIG failed on channel 1: Function not implemented (38)
>
> dmesg:
>
> Zapata Telephony Interface Registered on major 196
> Zaptel Version: 1.4.9.2
> Zaptel Echo Canceller: MG2
> ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 16 (level, low) -> IRQ 209
> FALC version: 00000000
> TE110P: Setting up global serial parameters for E1 FALC V1.2
> TE110P: Successfully initialized serial bus for card
> Found a Wildcard: Digium Wildcard TE110P T1/E1
> Zaptel networking not supported by this build.
>
> make data:
>
> make[1]: Entering directory `/usr/src/zaptel-1.4.9.2/menuselect'
> make[2]: Entering directory `/usr/src/zaptel-1.4.9.2/menuselect'
> make[2]: `menuselect' is up to date.
> make[2]: Leaving directory `/usr/src/zaptel-1.4.9.2/menuselect'
> make[1]: Leaving directory `/usr/src/zaptel-1.4.9.2/menuselect'
> make -C datamods datamods
> make: *** datamods: No such file or directory.  Stop.
> make: *** [data] Error 2
>
> Adding datamods to SUBDIR_MODULES in top level Makefile
>
> make:
>
> CC [M]  /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.o
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c: In function
> `fr_lmi_send':
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:450: error:
> `LMI_CISCO' undeclared (first use in this function)
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:450: error: (Each
> undeclared identifier is reported only once
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:450: error: for each
> function it appears in.)
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c: In function
> `fr_set_link_state':
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:575: error: structure
> has no member named `bandwidth'
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c: In function
> `fr_lmi_recv':
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:646: error:
> `LMI_CISCO' undeclared (first use in this function)
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:825: error: structure
> has no member named `bandwidth'
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:829: error: structure
> has no member named `bandwidth'
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:845: error: structure
> has no member named `bandwidth'
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c: In function `fr_rx':
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:878: error:
> `LMI_CISCO' undeclared (first use in this function)
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c: In function
> `hdlc_fr_ioctl':
> /usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.c:1209: error:
> `LMI_CISCO' undeclared (first use in this function)
> make[4]: *** [/usr/src/zaptel-1.4.9.2/kernel/datamods/hdlc_fr.o] Error 1
> make[3]: *** [/usr/src/zaptel-1.4.9.2/kernel/datamods] Error 2
> make[2]: *** [_module_/usr/src/zaptel-1.4.9.2/kernel] Error 2
>
> Am I missing something, or does zaptel.conf.sample need some updating?
>
> Alex
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>