[asterisk-users] ztdummy

[Jerry Geis]

>
> In article <47F4C604.1060301 at pagestation.com <http://lists.digium.com/mailman/listinfo/asterisk-users>>,
> Jerry Geis <geisj at pagestation.com <http://lists.digium.com/mailman/listinfo/asterisk-users>> wrote:
> >/ What does it take to get ztdummy to work correctly?
> />/ 
> />/ I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel 
> />/ 1.4.9.2
> />/ Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs.
> />/ Problem is playback() does not work. So then I stop zaptel, asterisk 
> />/ runs and playback() now
> />/ works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for 
> />/ that.
> />/ 
> />/ I am running Centos 5.1 with the latest kernel and fully updated.
> />/ 
> />/ How can I get ztdummy to work? There are no cards in the laptop.
> />/ I typically dont run asterisk on a laptop - but thats what the situation 
> />/ needed...
> /
> Jerry, the first thing to check is "cat /proc/interrupts" and see if there
> is an entry for rtc on IRQ 8. There should be, and the interrupt counts
> on there should be going up at approximately 1024 per second.
>
> What kernel version are you using? (uname -a)
>
>   
Tony,

/proc/interrupts shows:

    CPU0   CPU1
8:   1               0       IO-APIC-edge rtc

So the RTC is not incrementing.

uname -a shows x86_64 and Centos 5.1,  2.6.18-53.1.14.el5

Jerry

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080403/232bfad8/attachment.htm