[asterisk-users] g729 on 1.4.10.1

Scott Moseman scmoseman at gmail.com
Tue Sep 18 13:37:14 CDT 2007


Fyi...

[myphone]
disallow=all
allow=g729
canreinvite=no

[otherphone]
disallow=all
allow=g729
canreinvite=no

I attempted this setup and it works.  Media routed through the Asterisk.

Thanks,
Scott


On 9/18/07, Jeremy Mann <jmann at txhmg.com> wrote:
>
> Does G.729 phone -> asterisk -> G.729 phone work with reinvite turned off?
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> Sent: Tuesday, September 18, 2007 1:07 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] g729 on 1.4.10.1
>
> PSTN -> g729 requires transcoding at that point.
>
> You can however do:
>
> G.729 phone -> asterisk -> G.729 phone without license (from my
> understanding).
>
> But as soon as you introduce a non-g729 hop (ie. Analog PSTN line) it
> requires a license to preform transcoding.
>
> --
> Matt
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Scott Moseman
> Sent: September-18-07 1:51 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] g729 on 1.4.10.1
>
> On 9/18/07, Matthew Fredrickson <creslin at digium.com> wrote:
> >
> > I hate to ask what may be a silly question, but have you purchased
> > any G.729 licenses to use with the g.729 codec you downloaded?
> > If you haven't registered codec_g729 yet, that would be why you are
> > seeing this problem with codec_g729.
> >
>
> My understanding was that it's not required for pass-through.
>
> PSTN Phone -> g729 Gateway -> Asterisk -> g729 Phone
>
> Does this not equate to pass-through?  Maybe I misunderstood?
>
> Thanks,
> Scott
>



More information about the asterisk-users mailing list