[asterisk-users] ATrpms/Fritz FCPCI CAPI/Fedora 7

[Razza]

On 29/08/07, Razza <razza30 at gmail.com> wrote:
>
>
>
> On 29/08/2007, Patrick <asterisk-list at puzzled.xs4all.nl> wrote:
> >
> > On Tue, 2007-08-28 at 20:51 +0100, Razza wrote:
> > > HI all,
> > > Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using
> > > the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/
> > > I tried with a clean F7 build on my EPIA 5000 yesterday, after
> > > modifying /etc/capi.conf (removing the coment # in front of fcpci
> > > line) I received the following error when executing 'capiinit' -
> > >
> > > FATAL: Error inserting fcpci
> > > (/lib/modules/2.6.22.4-65.fc7/updates/drivers/isdn/fritz/fcpci.ko):
> > > Unknown symbol in module, or unknown parameter (see dmesg)
> > > ERROR: failed to load driver fcpci
> > >
> > > After some searcing I found this article -
> > > https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules-2.6.22/+bug/121978
> >
> > >
> > > I am a little stumped however what to do next and indeed if this is
> > > the cause of the problem, can anyone offer some guidance ?
> > > Thanks in advance.
> >
> > The solution is at the end of this page:
> > http://student.physik.uni-mainz.de/~reiffert/fcpci.php
> > Basically you need to replace pci_module_init with pci_register_driver
> >
> > fritz/src/main.c
> >
> > #if defined (__fcpci__)
> >        /*      if (0 == (err = pci_module_init (&fcpci_driver))) { */
> >        if (0 == (err = pci_register_driver (&fcpci_driver))) {
> >                LOG("PCI driver registered.\n");
> >
> > Regards,
> > Patrick
> >
>
> Within an RPM?


No one able to help?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070902/719e3b71/attachment.htm