[asterisk-users] PRI span configuration - span remains down

[David Kennedy]

Hi, thanks for the quick reply

I've literally just got off the phone with a Telewest engineer - after
being told the line was ok yesterday, I've been told it wasn't
actually turned on. D'oh!

If need be I do have a spare TE120P in a box in my desk drawer, so I
can send that to Manchester to be installed.

Thanks

Dave.



On 10/25/07, Rony Ron <upcomingbiz at gmail.com> wrote:
> Hello,
> Quoting Digium Support:
> "The TE110P has been discontinued and replaced in our product lineup with
> the TE120P, which features many overall improvements and does not suffer
> from the HDLC Abort/Bad FCS problems that the TE110P did."
>
> Better switch to TE120P,
>
>
> On 10/25/07, David Kennedy <davepkennedy at gmail.com> wrote:
> >
> > Hi,
> >
> > I'm trying to connect to Telewest/Virgin Media with a TE110P using
> > asterisk 1.4.13/zaptel 1.4.6. No matter what I try, my span always
> > appears as
> >
> > PRI span 1/0: Provisioned, Down, Active
> >
> > My zapata.conf is currently
> > -----------------------------------
> > [channels]
> > echocancel=yes
> > echocancelwhenbridged=no
> > echotraining=yes
> > switchtype=euroisdn
> > contect=from-pri
> > signalling=pri_cpe
> > group=1
> > channel => 1-15
> > channel => 17-31
> > -----------------------------------
> >
> > zaptel.conf is
> > -----------------------------------
> > span=1,1,0,ccs,hdb3,crc4
> > dchan=16
> > bchan=1-15,17-31
> > loadzone=uk
> > defaultzone=uk
> > -----------------------------------
> >
> > I'm in London and the server is in Manchester, so I can't look at the
> > server directly, but when we first started setting it up, apparently a
> > pair of cables were the wrong way round, so the card was in a RED
> > alarm state. We've switched the cables and now the card is OK. We did
> > have a lot of IRQ misses, so we've upgraded the kernel and now the
> > accuracy reported by zttest is about 99.98%. Telewest have checked the
> > line for faults and have reported that it's fine, but I just can't get
> > it working.
> >
> > Does anyone have any ideas/suggestions?
> >
> > Thanks,
> >
> > Dave
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>
> --
> Your next Partner !
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>