[asterisk-users] OSLEC and zaptel-1.4.5.1

[Alan Lord]

marcotasto wrote:
> Hi Alan.
> I've installed OSLEC with zaptel-1.4.5.1 applying the patches made for the 1.4 version and I have had the same problem.
> Looking at the compiler options I've found that the symbol ECHO_CAN_FROMENV is defined by default and this prevents the echo selection from zconfig.h.
> I've solved changing the first part of Makefile.kernel26 (in the zaptel directory) this way:
> 
> ifndef ECHO_CAN_NAME
>   ECHO_CAN_NAME := OSLEC
> endif
> 
> This forces the compiler to include OSLEC as echo cancellation engine (probably there is a better way but I don't know it).
> 
> I've then rebuilt zaptel and installed through normal make procedures.
> 
> To be able to modprobe it I've then copied the oslec.ko file build by the OSLEC distribution in the kernel driver directory (my own is /lib/modules/2.6.18.8-0.5-default/misc and it's where zaptel drivers are installed). I've then run the depmod command to regenerate the modules dependencies.
> 
> I'm now able to modprobe zaptel and to have oslec automatically installed as you can see below:
> 

Many thanks for the information. That sounds like it should do the trick!

I will try later on and report back if I have success.

Grazie Mille


Alan

-- 
The way out is open!
http://www.theopensourcerer.com