[asterisk-users] asterisk hylafax iaxmodem

[Giedrius Augys]

Hi,
I have problems with asterisk and hylafax+ iaxmodem. I can successfully send
faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I have
problems: No carrier. This is hylafax log, maybe you can suggest me  where
to  find ...

Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906
Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2
Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 COMMID
000000041 DEVICE '/dev/ttyIAX0' FROM 'root <root at god>' USER root
Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING
Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r]
Oct 17 07:38:48.22: [22428]: --> [2:OK]
Oct 17 07:38:48.22: [22428]: MODEM set XON/XOFF/FLUSH: input ignored, output
disabled
Oct 17 07:38:48.22: [22428]: DIAL 37052390906
Oct 17 07:38:48.22: [22428]: <-- [16:ATDT37052390906\r]
Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER]
Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR [2] No
carrier detected
Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR [333]
No carrier detected; too many attempts to dial
Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r]
Oct 17 07:39:31.86: [22428]: --> [2:OK]
Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF
Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow control
unchanged)
Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Oct 17 07:39:31.86: [22428]: SESSION END


-- 
Pagarbiai  / Best Regards,
Giedrius Augys
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071017/1b1b371a/attachment.htm