[asterisk-users] AA50 Paging

[Klaverstyn, David C]

I’m not sure if this will work on the Grandstream phones but I use this for the Linksys phones.

 

exten => 5555,1,SIPAddHeader(Call-Info:\;answer-after=0)
exten => 5555,n,Dial(SIP/201)
exten => 5555,n,HangUp 

 

I would guess it would work with multiple phones, i.e.,   exten => 5555,n,Dial(SIP/201& SIP/202& SIP/203& SIP/204)

 

You may need to check the phone is configured for paging auto answer.  The Linksys has a field of Paging Serv and is set to yes.

 

Let me know if it works.

 

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kelly opal
Sent: Monday, 15 October 2007 7:46 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] AA50 Paging

 

Hi
    I just got an AA50 from Digium and the paging command reboots asterisk when you use it. Digium says it is a requested feature and is of low priority. Is there any other way to page 10 Grandstream gxp2000 phones with meetme or some other command than the page command.

Thanks in advance.

Kelly 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071015/70760b04/attachment.htm