[asterisk-users] IAXy and hook flash transfer

[Mojo with Horan & Company, LLC]

When I was unable to figure out the IAXy's methods, I went with 
Asterisk's features.conf -- ## for blindxfer, and never looked back.  
That worked quite well.


Michael Munger wrote:
> So what, then, is the procedure to transfer a call from a POTS phone on
> the FXS port of an IAXy?
>
> Yours,
> Michael Munger, dCAP
> 404-438-2128
> michael at highpoweredhelp.com
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin P.
> Fleming
> Sent: Wednesday, October 03, 2007 3:42 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] IAXy and hook flash transfer
>
> Michael Munger wrote:
>   
>> In features.conf, I have uncommented the transfer features under
>>     
> feature
>   
>> map, but I still cannot transfer using a POTS phone on an IAXy
>>     
> adapter.
>   
>> I think I am missing something here.... Any help is appreciated.
>>     
>
> Those features are triggered via DTMF, not using a protocol-level
> transfer. The IAXy uses IAX2 to talk to Asterisk, so doing a flash-hook
> on the IAXY's FXS port will cause the IAXy to create a new IAX2 channel
> and handle the transfer itself.
>
>