[asterisk-users] SIP port 5060 closed - how do I open it?

[Adrian Marsh]

Correction:

 

netstat -an|grep 5060

udp        0      0 0.0.0.0:5060                0.0.0.0:*

 

Adrian Marsh

  

________________________________

From: Adrian Marsh 
Sent: 27 November 2007 15:24
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] SIP port 5060 closed - how do I open it?

 

Zaheer,

 

If a "netstat -an|grep -I LISTENING" shows that a LISTENING port for
5060 is there, then the problem isn't Asterisk, but some firewall system
on the server is blocking access from outside.  If its not there, then
come back to the group..

 

Adrian Marsh

  

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zaheer K.
Master
Sent: 27 November 2007 14:21
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] SIP port 5060 closed - how do I open it?

 

Hi all,

I have *NOW beta 6 (asterisk 1.4.5) and I've configured it with a SIP
trunk line. I can make outgoing calls, but I cannot receive any incoming
calls. A port scan of my * server shows that port 5060 is closed. How do
I open this port? In my users.conf, I have set [trunk_1] to hassip=yes
and port=5060. 

 

Also, in the global SIP.conf file

bindport=5060

bindaddr=0.0.0.0

allowexternaldomains=no

allowexternalinvites=no

 

Do I have to set allowexternalinvites or allowexternaldomains to yes to
accept INVITEs from my ITSP? I've already configured the system to allow
traffic from their IP address.

 

Thanks for the help!

 

Regards,

Zaheer

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071127/4ec62ce3/attachment.htm