[asterisk-users] __sip_xmit problem

[Steve Davies]

On 11/9/07, Eric ManxPower Wieling <eric at fnords.org> wrote:
> Steve Davies wrote:
> >
> > I would hazard that it is the port number of '0' that is causing the
> > problem. It should not be necessary, but have you tried
> >
> >   Dial(SIP/4009 at 10.0.0.22:5060)
> >
> > To see if it helps. If so, it is probably symptomatic of a config
> > error elsewhere. I seem to remember seeing reference to a similar
> > problem on the list a couple of months back, but did not find it with
> > a cursory search.
>
> You do not need to specify the port number.  Asterisk will default to
> sending to UDP port 5060 if you don't specify a port.

I know that, and you know that, and we all know that, but this is part
of the wider "diagnostic process" to eliminate a bug :)

I still suggest that it is tried to exclude it.

Steve