[asterisk-users] Pickup Command not working

[Lacy Moore]

According to http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup and in
particular the REMARK section:

Remark: This command pickups up the dialed EXTENSION, not the ringing
channel/device.
So when the dialplan says;

 200,1,Dial(SIP/100&SIP/101)

And someone calls extension 200
The call cannot be picked up by using Pickup(100 at default) or Pickup(
101 at default)
But needs to be picked up using Pickup(200 at default)

The context however is NOT mandatory
I had to change parts of my dial plan to take this into account.  It may not
be related to your problem, though.
On Nov 6, 2007 4:04 PM, Lutgring, Sam <LutgrinS at calhounisd.org> wrote:

>  When I execute a pickup on a ringing phone I get CALL FAILED REASON CODE
> 603.  I am dialing **212 with the following config.  Anyone have a
> suggestion?
>
> EXTENSIONS.CONF
> -snip-
> [BLF_Group_Pickup]
> ; Defines how the extension to pick up a ringing phone in your BLF group
> exten => _**XXX,1,Pickup(${EXTEN:2})
> exten => _**XXX,n,Hangup()
> [BLF]
> ; Defines a BLF Hint for phones
> exten => 212,hint,SIP/sam
> -snip-
>
> SIP.CONF
> -snip-
> [sam]
> type=friend
> username=sam
> fromuser=sam
> callerid=sam
> host=dynamic
> dtmfmode=RFC2833
> disallow=all
> allow=ulaw
> call-limit=20
> subscribecontext=BLF
>
> Thanks in advance for any help.
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Lacy Moore
Somewhere I wish I wasn't
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071107/3ec11f39/attachment.htm