[asterisk-users] Connection astrisk to a RAS (portmaster)

[Nicolas Ross]

We've finaly solved it...

For once, when we plugued the PRI into the first port, all began to work 
better.

As for my dial-out into my RAS, I had to put pridialplan=unknown into my 
channels group of incoming line, and pridialplan=national in my group for my 
pri going to my RAS. That did the trick.

Thanks,

Nicolas

----- Original Message ----- 
From: "Nicolas Ross" <rossnick-lists at cybercat.ca>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Thursday, November 01, 2007 10:31 AM
Subject: Re: [asterisk-users] Connection astrisk to a RAS (portmaster)


> Thanks,
>
> That's not it.
>
> I juste uninstalled wanpipe, redownloaded zaptel (another version 
> (1.4.5.1)
> to try), re-installed wanpipe, (patching zaptel in the process), recompile
> wanpipe, re-compiled zaptel, recompiled asterisk, re-installed everything,
> and still got the same errors...
>
> Nicolas
>
>
> ----- Original Message ----- 
> From: "Jared Smith" <jsmith at digium.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Thursday, November 01, 2007 9:15 AM
> Subject: Re: [asterisk-users] Connection astrisk to a RAS (portmaster)
>
>
>> On Wed, 2007-10-31 at 20:57 -0400, Nicolas Ross wrote:
>>> I also get sometime :
>>>
>>>   == Primary D-Channel on span 2 down
>>> [Oct 31 20:50:53] WARNING[10250]: chan_zap.c:2393 pri_find_dchan: No
>>> D-channels available!  Using Primary channel 48 as D-channel anyway!
>>>   == Primary D-Channel on span 2 up
>>
>> I don't claim to be an expert on the Wanpipe drivers, but it's been my
>> experience that if your D-channels bounce up and down like that every
>> few seconds, that the Wanpipe drivers didn't successfully patch Zaptel,
>> or you haven't restarted Zaptel since the Wanpipe drivers patched
>> Zaptel.
>>
>> Hopefully that's enough to get you up and running.