[asterisk-users] PRI debuging shows 'Ext: 0' (Was: Outgoing PRI CID?)

[Eric "ManxPower" Wieling]

The fact that you are sending "528" as your Caller*ID might be a problem 
for your carrier.

Turbo Fredriksson wrote:
> Quoting mail-lists <mail-lists at peachnet.com>:
> 
>> Turbo Fredriksson wrote:
>>> We have now got our new PRI line (10 channels, 100 numbers) connected
>>> and everything is working except the outgoing caller ID. Whatever
>>> SIP phone I'm using, the CID that's shown is the very first number...
> 
> Enabling PRI debugging shows the following:
> 
> ----- s n i p -----
> 1 > [6c 05 21 81 35 32 38]
> 1 > Calling Number (len= 7) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> 1 >                           Presentation: Presentation permitted, user number passed network screening (1)  '528' ]
> ----- s n i p -----
> 
> I _assume_ (maybe wrongly!) that this '0' is the ${CALLINGPRES}
> variable. If I print this just before the Dial(), this is indeed
> zero...
> 
> But it seems to be read-only... Any other way to send the extension
> down to the other end of the PRI line?
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>