[asterisk-users] Re: DUNDi configuration problem

[Tim Verscheure]

ok so now I changed "ext-local" to "dundi-ext" and I created this
context at the bottom of the extensions file. This is now the case.

[dundi-priv-canonical]
; Direct numbers

exten => 5010,1,NooP(DUNDI LOOKUP 5010)
exten => 5011,1,NooP(DUNDI LOOKUP 5011)

exten => _60XX,1,Goto(dundi-ext,${EXTEN},1)

[dundi-priv-customers]
; If you are an ITSP or Reseller, list your customers here.
exten => _60XX,1,Goto(dundi-ext,${EXTEN},1)

[dundi-priv-via-pstn]
; If you are freely delivering calls to the PSTN, list them here

[dundi-priv-local]
include => dundi-priv-canonical
include => dundi-priv-customers
include => dundi-priv-via-pstn

exten => 5010,1,Dial(SIP/5010)
exten => 5011,1,Dial(SIP/5011)

[dundi-priv-switch]
; Just a wrapper for the switch
switch => DUNDi/priv

[dundi-priv-lookup]
include => dundi-priv-local
include => dundi-priv-switch

[macro-dundi-priv]
exten => s,1,Goto(${ARG1},1)
include => dundi-priv-lookup

[trydundi]
exten => _.,1,Macro(dundi-priv,${EXTEN})
exten => _.,2,Congestion


This is the dundi-ext at the bottom. In there I put this line:
[dundi-ext]
exten => _60XX,1,Dial(SIP/${EXTEN}@priv)

I made this myself, I think that if I get an incoming call from for
example 6010, the person would be dialing SIP/6000 at priv, right?

this is the output:
*CLI>     -- Executing [5011 at default:1] Goto("SIP/6010-0820cdc8",
"dundi-ext|5011|1") in new stack
    -- Goto (dundi-ext,5011,1)
    -- Executing [5011 at dundi-ext:1] Dial("SIP/6010-0820cdc8",
"SIP/5011 at priv") in new stack
[May 22 14:36:18] WARNING[4520]: chan_sip.c:2738 create_addr: No such host: priv
[May 22 14:36:18] WARNING[4520]: app_dial.c:1099 dial_exec_full:
Unable to create channel of type 'SIP' (cause 3 - No route to
destination)
  == Everyone is busy/congested at this time (1:0/0/1)
  == Auto fallthrough, channel 'SIP/6010-0820cdc8' status is 'CHANUNAVAIL'


2007/5/21, Remco Post <remco at pipsworld.nl>:
> Tim Verscheure wrote:
> > Now I get this... If I call from 5011 on the 192.168.1.103 machine to
> > 6010 on the 192.168.1.69 machine my X-lite softphone says, call
> > declined
> >
> > this is the output:
> >    -- Executing [6010 at default:1] Goto("SIP/5011-081da508",
> > "ext-local|6010|1") in new stack
> >    -- Goto (ext-local,6010,1)
> > [May 21 15:32:46] WARNING[8939]: pbx.c:2450 __ast_pbx_run: Channel
> > 'SIP/5011-081da508' sent into invalid extension '6010' in context
> > 'ext-local', but no invalid handler
> >
>
> so, is there an extension 6010 in you context ext-local? Probably not ;-)
>
> > I'll add my extension file so you can see it. greetz