Fwd: [asterisk-users] Change Codec

Arun Kumar arunvoip at gmail.com
Sun May 6 00:09:47 MST 2007


Here is some more details about my setup:

Customer <-> PRI <-> Server A with G.729 <-> IAX Trunk G729 <-> Server B no
G729 (pass through) <-> Snom Phone with G729

with incoming call there  is no problem with when I try to make outbound and
want to play some prompt on server b Im not able. in server B sip.conf :
disallow=all allow=g729 if I'll write then Im able to make outbound call but
not able to play any kind of prompt to the user who is making outbound call
if disallow=all allow=ulaw and allow=g729 Im able to play some prompt but
not able to make calls to the customer.

thanks
arun

On 5/1/07, Salvatore Giudice <Salvatore.Giudice at voipsecuritytraining.com >
wrote:

>  Put similar allow/disallow statements in the sip or iax entry you create
> for your outbound ip calls. Be aware that if you use different codecs for
> phones and your termination provider, all media will have to go through
> asterisk and you will incur the processing overhead of codec conversion.
>
>
>
> Good luck, SG
>
>
>
> --------------------------------------------------
> Salvatore Giudice
> Salvatore.Giudice at VoIPSecurityTraining.com
>
> VoIP Security Training, LLC
> http://VoIPSecurityTraining.com
>
> 848 N. Rainbow Blvd. #1676
> Las Vegas, NV 89107
> Phone: (617) 959-7625
> Fax: (214) 279-2906
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Arun Kumar
> *Sent:* Tuesday, May 01, 2007 9:24 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] Change Codec
>
>
>
> Hi
>
> I've install Asterisk 1.4.2 and its working fine. In my sip.conf I've
> allowed ulaw and g729. I want to change the codec for outbond calls. Please
> help not able to find anything using search.
>
> thanks
>
> arun
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070506/0aa26b76/attachment.htm


More information about the asterisk-users mailing list