[asterisk-users] Nice Transfer Feature

[Jeronimo Romero]

Just be careful with the sidecar. It was to be screwed on and the screws
that come with the unit strip very easily. Make sure you have a nice
electronics grade screwdriver with a long thin shaft or you'll have
trouble with the side car. 
Another really nice feature of this phone is that the BLF for call
parking and call park pickup work flawlessly with asterisk 1.4.1 and up.


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lacy Moore
- Aspendora
Sent: Thursday, March 29, 2007 2:31 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Nice Transfer Feature

I just noticed the Aastra 57i do something that I haven't seen before.
 I called from one phone (phone 1) to the 57i.  I answered it.  Then,
I pressed Transfer and dialed the extension for the third phone (in
this case a Cisco 7960 in Sip).  I did not answer the Cisco, but
noticed the caller ID was showing the Aastra (as expected).  I hung up
the Aastra to complete the transfer and noticed the caller ID on the
Cisco was updated to show the Caller ID of the original caller (phone
1), just like a blind transfer would do.

The point is that the caller ID was updating during the ringing.  I
had not seen a phone capable of this.

This, along with the one touch parking and XML capabilities, is
looking like the Aastra may be what I'm looking for in a receptionist
phone.

-- 
Lacy Moore
Somewhere I wish I wasn't
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users