[asterisk-users] Polycom SoundPoint 501

[Paolo Supino]

Hi Darryl

   I went for a little stroll through the config files and found the 
source of the symptom. You were right. The [MAC]-phone.cfg of the 501s 
on my network do look for DNSnaptr, while the others don't.









TIA
Paolo




Darryl Dunkin wrote:

> What transport method are you using? Sounds like you are using DNSnaptr
> without specifying a port. When set to DNSnaptr, be sure you have both
> the hostname and port (5060) defined.
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paolo
> Supino
> Sent: Wednesday, March 28, 2007 17:18
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] Polycom SoundPoint 501
> 
> Hi
> 
>   We've setup an Asterisk PBX recently and I encountered the following 
> problem: When [mac address]-registration.cfg file includes the FQDN of 
> the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even
> 
> try to) register with the Asterisk PBX unless the DNS (it asks) 
> successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this 
> happen to anyone else?
> 
> 
> 
> 
> 
> 
> PS - The application version running on the SoundPoint 501s is
> 1.6.7.0098
> 
> 
> 
> 
> 
> TIA
> Paolo
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>