[asterisk-users] Noob question regarding PCI 2.x & TDM400P Card

Yuan LIU yliu11 at hotmail.com
Fri Mar 23 09:58:57 MST 2007


>From: Barton Fisher <bhfisher at icpage.com>
>Date: Fri, 23 Mar 2007 09:26:44 -0800
>
>I have some old PC's I want to build as a test box - It's up and running OK 
>now.  Now I installed a TDM400P and there is nothing I can do to get the 
>card to come up.  My guess is the box is not PCI 2.2 compliant or does it 
>need to be to see the card?

I had a similar situation.  What I found was: the CMOS setup program had an 
option to turn PCI 2.2 on or off - default was off.  Later motherboards no 
longer have this.

Yuan Liu

>Thanks, Bart
>
>Here's what I know:
>
>Processors 	1
>Model 	Pentium III (Katmai)
>CPU Speed 	551.37 MHz
>Cache Size 	512 KB
>System Bogomips 	1103.57
>PCI Devices
>- 	Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
>- 	Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
>- 	Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
>- 	IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE
>- 	ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA
>- 	PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
>- 	USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
>- 	VGA compatible controller: Chips and Technologies F69000 HiQVideo
>
>


>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list