[asterisk-users] Tesco Internet Phone

[Antony Stone]

On Wednesday 21 March 2007 11:57, bails wrote:

> Antony Stone wrote:
> > On Friday 02 March 2007 07:46, Alan Chandler wrote:
> >> On Thursday 01 March 2007 20:33, bails wrote:
> >>> plug it in a linux box and tell us what it is please,
> >>> generic-usb-audio or what?
> >>>
> >>> Bails
> >>>
> >>> Julian Lyndon-Smith wrote:
> >>>> Yeah, that's where firefly comes from, doesn't it.
> >>>>
> >>>> I've got the base station plugged in, and the handset connected to
> >>>> it, but it always says "pc unavailable".
> >>>>
> >>>> My system (xp) "sees" a "usb phone" for speakers and microphone,
> >>>> but I can't get it to work.
> >>
> >> Did this go any further.  I would be interested in this.
> >
> > I too would really like to find or help adapt a driver for this.
> >
> > Here's what I get from my USB-DECT device:
> >
> > # cat /proc/bus/usb/devices
> > T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
> > D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > P:  Vendor=19af ProdID=694d Rev= 0.00
> > S:  Manufacturer=innoMax Technology Ltd.
> > S:  Product=Cordless USB Phone
> > C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=400mA
> > I:  If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=audio
> > I:  If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=audio
> > I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
> > E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
> > I:  If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=audio
> > I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
> > E:  Ad=02(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
> > I:  If#= 3 Alt= 0 #EPs= 2 Cls=03(HID  ) Sub=00 Prot=00 Driver=hid
> > E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl=1ms
> > E:  Ad=01(O) Atr=03(Int.) MxPS=  32 Ivl=1ms
> >
> > # lsusb -v -s 006

<snipped for brevity>

> > Let me know if I can help with any other info.
> >
> >
> > Antony.
>
> Whats the output of dmesg when you plug it in?

hub.c: new USB device 00:07.2-1.1, assigned address 7
usbaudio: device 7 audiocontrol interface 0 has 1 input and 1 output 
AudioStreaming interfaces
usbaudio: device 7 interface 1 altsetting 1 channels 1 framesize 2 configured
usbaudio: valid input sample rate 8000
usbaudio: device 7 interface 1 altsetting 1: format 0x00000010 sratelo 8000 
sratehi 8000 attributes 0x00
usbaudio: device 7 interface 2 altsetting 0 does not have an endpoint
usbaudio: device 7 interface 2 altsetting 1 channels 1 framesize 2 configured
usbaudio: valid output sample rate 8000
usbaudio: device 7 interface 2 altsetting 1: format 0x00000010 sratelo 8000 
sratehi 8000 attributes 0x00
usbaudio: registered dsp 14,19
usbaudio: constructing mixer for Terminal 4 type 0x0301
usbaudio: warning: found 1 of 0 logical channels.
usbaudio: assuming the channel found is the master channel (got a Philips 
camera?). Should be fine.
usbaudio: registered mixer 14,16
usbaudio: constructing mixer for Terminal 2 type 0x0101
usbaudio: unit 0 not found!
usbaudio: no mixer controls found for Terminal 2
usb_audio_parsecontrol: usb_audio_state at c11f93e0
usb_control/bulk_msg: timeout
: USB HID v1.01 Device [innoMax Technology Ltd. Cordless USB Phone] on 
usb1:7.3

-- 
"It wouldn't be a good idea to talk about him behind his back in front of 
him."

 - murble

                                                     Please reply to the list;
                                                           please don't CC me.