[asterisk-users] snom led not working with asterisk 1.4.1

[Giorgio Incantalupo]

Hi Steve,
as you know if you type "show hints" inside asterisk console you can see 
phone status. When a phone is not connected, Asterisk says it is 
Unavailable. With Asterisk 1.2.9.1 my SNOM leds worked well so I knew 
when a phone was not available but with Asterisk 1.4.1 is not possible 
anymore. This is one of the functions which I'm trying to keep from 
Asterisk 1.2.9.1 to 1.4.1 .

TIA

Giorgio Incantalupo



Steve Murphy wrote:
> On Wed, 2007-03-21 at 13:55 +0100, Giorgio Incantalupo wrote:
>   
>> Hi Steve,
>> thank you for your help, I set up the call-limit parameter  and SNOM 
>> light are working good for ringing and busy status. I took a look at 
>> sip.conf.sample but nothing about unavailable status. Should I set some 
>> other parameter or there is some "trick"? Consider that my firmware 
>> phone is updated to the last available version.
>>
>> TIA
>>
>> Giorgio Incantalupo
>>
>>
>>     
> Giorgio--
>
> no tricks, sorry!... I've got a snom360 here, and I've been slowly
> working my way thru the buttons myself. There's a config file option to
> make the "Retrieve" button work, you provide a name for an extension for
> it to use. You then provide
> that extension in the context for the phone, that does the
> VoiceMailMain() call.
>
> The "Record" button uses a SIP "INFO" message to asterisk, that isn't
> implemented, so that's not going to work at the moment.
>
> What does "unavailable" mean, and how do you get that way?
>
> murf
>
>   
>> Steve Murphy wrote:
>>     
>>> On Thu, 2007-03-15 at 15:33 +0100, Giorgio Incantalupo wrote:
>>>   
>>>       
>>>> Hi,
>>>> I'm testing Asterisk 1.4.1 with Snom phones but leds are not working to 
>>>> show which devices are busy/not connected. The same phone worked with 
>>>> Asterisk 1.2.9.1.
>>>> I would appreciate anyone who knows how to setup Asterisk 1.4.1 to 
>>>> behave as 1.2.9.1.
>>>>     
>>>>         
>>> Giorgio--
>>>
>>> That's a pretty generic question! But that aside, there's been a
>>> substantive change in the configs for SIP phones, that could easily
>>> affect your device state monitoring.
>>>
>>> So, suggestion: read the example sip config file in the src/configs dir,
>>> pay close attention to stuff like call-limit, the limitonpeers stuff,
>>> etc, and then make sure you update all your phone entries in sip.conf.
>>> Restart asterisk, or reload sip, and hopefully your lights will work.
>>>
>>> In general, EVERYONE, here's some advise: When you 
>>> upgrade from version "1.x" to "1.(x+2)", always review ALL
>>> your config files against the new config file examples.
>>> Things change! Hopefully, for the better!
>>>
>>> murf
>>>
>>>   
>>>       
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>     
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>