[asterisk-users] T1 cable for Digium T1/E1 Cards

BJ Weschke bweschke at gmail.com
Sun Mar 18 15:57:44 MST 2007


 You can use a patch cable, yes. The T1 will look to use pins 1,2,4
and 5 while Ethernet will typically use 1,2,3 and 6 provided you're
not using POE or something simliar that requires additional pins.

On 3/18/07, Jeronimo Romero <jromero at eusnetworks.com> wrote:
> Is there any technical difference between a T1 cable and a cat5e patch
> cable as far as using them with Digium T1/E1 cards? Can PRI circuits
> terminating at a smart jack connect successfully to Digium cards using
> straight through CAT5e cables? If so, are they using all of the pins in
> the cable?
>
> Thanks in advance
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Bird's The Word Technologies, Inc.
http://www.btwtech.com/


More information about the asterisk-users mailing list