[asterisk-users] A200 card problem

Thu Mar 15 18:14:49 MST 2007

I couldn't agree more.

 -----Original Message-----
From:   "Josué Conti" <josueconti at gmail.com>
To:     jnovack at stromberg-carlson.org,  "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Cc:     
Sent:  Thu, 15 Mar 2007 20:31:53 -0300
Delivered:  Thu,  15 Mar 2007 20:20:22 
Subject:[asterisk-users] A200 card problem

Exactly, Sangoma support is THE BEST! :)

Best Regards

Josué

2007/3/15, John Novack <jnovack at stromberg-carlson.org>:
>
> Sangoma gives excellent support
> Suggest you try there first
> They probably will want SSH access to the box.
> Send them an e-mail
>
> John Novack
>
>
> Todd H wrote:
> > Hi -
> > I just got an A200 card with 1 FXO and 1 FXS module.  Sadly, I can't
> > make it work- currently, asterisk will not startup because of a bad
> > module.  Below are some log files/config files.  If anyone has any
> > suggestions, I'd appreciate it.
> >
> > I used Trixbox 2.0 and followed instructions on
> > (http://sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no
> > problems running through or compiling.     I also downloaded trixbox
> > 2.0 with sangoma drivers included directly from sangoma
> > (http://wiki.sangoma.com/Trixbox-1xx).  I know how this list feels
> > about trixbox, but still, the card/configs are the same, no?  Any
> > advice is appreciated.
> > thanks
> >   Todd
> >
> > +++++++++++++++++++++++  /var/log/asterisk/full++++++++
> > Mar 15 16:12:37 VERBOSE[31964] logger.c:  [chan_mgcp.so]Mar 15
> > 16:12:37 VERBOSE[31964] logger.c:  [chan_mgcp.so] => (Media Gateway
> > Control Protocol (MGCP))
> > Mar 15 16:12:37 VERBOSE[31964] logger.c:  [chan_local.so]Mar 15
> > 16:12:37 VERBOSE[31964] logger.c:  [chan_local.so] => (Local Proxy
> > Channel)
> > Mar 15 16:12:37 VERBOSE[31964] logger.c:  [chan_phone.so]Mar 15
> > 16:12:37 VERBOSE[31964] logger.c:  [chan_phone.so] => (Linux Telephony
> > API Support)
> > Mar 15 16:12:37 VERBOSE[31964] logger.c:  [chan_zap.so]Mar 15 16:12:37
> > VERBOSE[31964] logger.c:  [chan_zap.so] => (Zapata Telephony w/PRI)
> > Mar 15 16:12:37 WARNING[31964] chan_zap.c: Unable to specify channel
> > 1: No such device or address
> > Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to open channel 1: No
> > such device or address
> > here = 0, tmp->channel = 1, channel = 1
> > Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to register channel '1'
> > Mar 15 16:12:37 WARNING[31964] loader.c: chan_zap.so: load_module
> > failed, returning -1
> > Mar 15 16:12:37 WARNING[31964] loader.c: Loading module chan_zap.so
> > failed!
> > [root at asterisk1 ~]#
> > +++++++++++++++++++++++ END /var/log/asterisk/full++++++++
> >
> > +++++++++++++++++++++++  /var/log/messages++++++++
> > [root at asterisk1 ~]# tail -20 /var/log/messages
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_config.so] => (Text
> > Extension Configuration)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_functions.so] =>
> > (Builtin dialplan functions)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_ael.so] => (Asterisk
> > Extension Language Compiler)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_dundi.so] =>
> > (Distributed Universal Number Discovery (DUNDi))
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_loopback.so] =>
> > (Loopback Switch)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_spool.so] => (Outgoing
> > Spool Support)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_iax2.so] => (Inter
> > Asterisk eXchange (Ver 2))
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_agent.so] => (Agent
> > Proxy Channel)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_skinny.so] => (Skinny
> > Client Control Protocol (Skinny))
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_h323.so] => (Objective
> > Systems H323 Channel)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_sip.so] => (Session
> > Initiation Protocol (SIP))
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_features.so] =>
> > (Feature Proxy Channel)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [skipping chan_oss.so]
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_mgcp.so] => (Media
> > Gateway Control Protocol (MGCP))
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_local.so] => (Local
> > Proxy Channel)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_phone.so] => (Linux
> > Telephony API Support)
> > Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_zap.so] => (Zapata
> > Telephony w/PRI)
> > Mar 15 16:24:08 asterisk1 safe_asterisk: Asterisk died with code 1.
> > Mar 15 16:24:08 asterisk1 safe_asterisk: Automatically restarting
> > Asterisk.
> > Mar 15 16:24:08 asterisk1 asterisk: safe_asterisk startup succeeded
> > [root at asterisk1 ~]#
> > +++++++++++++++++++++++ END /var/log/messages++++++++
> >
> >
> > ++++++++++++++++++++++/etc/zaptel.conf+++++++++++++++
> > [root at asterisk1 ~]# more /etc/zaptel.conf
> > # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not
> > hand edit
> > # Zaptel Channels Configurations (zaptel.conf)
> > #
> > loadzone=us
> > defaultzone=us
> >
> > # Sangoma A200 [slot:9 bus:1 span: 1]
> > fxsks=1
> > fxsks=2
> > fxoks=3
> > fxoks=4
> > [root at asterisk1 ~]#
> > ++++++++++++++++++++++END /etc/zaptel.conf+++++++++++++++
> >
> > ++++++++++++++++++++++/etc/asterisk/zapata.conf+++++++++++++++
> > [root at asterisk1 asterisk]# more zapata.conf
> > ;
> > ; Zapata telephony interface
> > ;
> > ; Configuration file
> >
> > [trunkgroups]
> >
> > [channels]
> >
> > language=en
> > context=from-zaptel
> > signalling=fxs_ks
> > rxwink=300              ; Atlas seems to use long (250ms) winks
> > ;
> > ; Whether or not to do distinctive ring detection on FXO lines
> > ;
> > ;usedistinctiveringdetection=yes
> >
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=yes
> > usecallingpres=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > cancallforward=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=no
> > echotraining=800
> > rxgain=0.0
> > txgain=0.0
> > group=0
> > callgroup=1
> > pickupgroup=1
> > immediate=no
> >
> > ;faxdetect=both
> > faxdetect=incoming
> > ;faxdetect=outgoing
> > ;faxdetect=no
> >
> > ;Include genzaptelconf configs
> > #include zapata-auto.conf
> >
> > group=1
> >
> > ;Include AMP configs
> > #include zapata_additional.conf
> >
> > [root at asterisk1 asterisk]#
> > ++++++++++++++++++++++END /etc/asterisk/zapata.conf+++++++++++++++
> >
> > ++++++++++++++++++++++/etc/asterisk/zapata-auto.conf++++++++++++++
> > ; Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not
> > hand edit
> > ; Zaptel Channels Configurations (zapata.conf)
> > ;
> > ; This is not intended to be a complete zapata.conf. Rather, it is
> > intended
> > ; to be #include-d by /etc/zapata.conf that will include the global
> > settings
> > ;
> > callerid=asreceived
> >
> > ;Sangoma A200 [slot:9 bus:1 span: 1]
> > context = from-zaptel
> > group = 0
> > signalling = fxs_ks
> > channel => 1
> >
> > context = from-zaptel
> > group = 0
> > signalling = fxs_ks
> > channel => 2
> >
> > context = from-internal
> > group = 1
> > signalling = fxo_ks
> > channel => 3
> >
> > context = from-internal
> > group = 1
> > signalling = fxo_ks
> > channel => 4
> > ++++++++++++++++++++++/etc/asterisk/zapata-auto.conf++++++++++++++
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

E-mail classificado pelo Identificador de Spam Inteligente Terra.
Para alterar a categoria classificada, visite
http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1174001824.883301.4399.morondava.hst.terra.com.br,22304,Des15,Des15

 --Original Message Ends--

-- 
Melcon Moraes <melcon.moraes at terra.com.br>