[asterisk-users] A200 card problem

Thu Mar 15 14:15:47 MST 2007

Sangoma gives excellent support
Suggest you try there first
They probably will want SSH access to the box.
Send them an e-mail

John Novack

Todd H wrote:
> Hi -
> I just got an A200 card with 1 FXO and 1 FXS module.  Sadly, I can't 
> make it work- currently, asterisk will not startup because of a bad 
> module.  Below are some log files/config files.  If anyone has any 
> suggestions, I'd appreciate it.
>
> I used Trixbox 2.0 and followed instructions on 
> (http://sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no 
> problems running through or compiling.     I also downloaded trixbox 
> 2.0 with sangoma drivers included directly from sangoma 
> (http://wiki.sangoma.com/Trixbox-1xx).  I know how this list feels 
> about trixbox, but still, the card/configs are the same, no?  Any 
> advice is appreciated.
> thanks
>   Todd
>
> +++++++++++++++++++++++  /var/log/asterisk/full++++++++
> Mar 15 16:12:37 VERBOSE[31964] logger.c:  [chan_mgcp.so]Mar 15 
> 16:12:37 VERBOSE[31964] logger.c:  [chan_mgcp.so] => (Media Gateway 
> Control Protocol (MGCP))
> Mar 15 16:12:37 VERBOSE[31964] logger.c:  [chan_local.so]Mar 15 
> 16:12:37 VERBOSE[31964] logger.c:  [chan_local.so] => (Local Proxy 
> Channel)
> Mar 15 16:12:37 VERBOSE[31964] logger.c:  [chan_phone.so]Mar 15 
> 16:12:37 VERBOSE[31964] logger.c:  [chan_phone.so] => (Linux Telephony 
> API Support)
> Mar 15 16:12:37 VERBOSE[31964] logger.c:  [chan_zap.so]Mar 15 16:12:37 
> VERBOSE[31964] logger.c:  [chan_zap.so] => (Zapata Telephony w/PRI)
> Mar 15 16:12:37 WARNING[31964] chan_zap.c: Unable to specify channel 
> 1: No such device or address
> Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to open channel 1: No 
> such device or address
> here = 0, tmp->channel = 1, channel = 1
> Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to register channel '1'
> Mar 15 16:12:37 WARNING[31964] loader.c: chan_zap.so: load_module 
> failed, returning -1
> Mar 15 16:12:37 WARNING[31964] loader.c: Loading module chan_zap.so 
> failed!
> [root at asterisk1 ~]#
> +++++++++++++++++++++++ END /var/log/asterisk/full++++++++
>
> +++++++++++++++++++++++  /var/log/messages++++++++
> [root at asterisk1 ~]# tail -20 /var/log/messages
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_config.so] => (Text 
> Extension Configuration)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_functions.so] => 
> (Builtin dialplan functions)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_ael.so] => (Asterisk 
> Extension Language Compiler)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_dundi.so] => 
> (Distributed Universal Number Discovery (DUNDi))
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_loopback.so] => 
> (Loopback Switch)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [pbx_spool.so] => (Outgoing 
> Spool Support)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_iax2.so] => (Inter 
> Asterisk eXchange (Ver 2))
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_agent.so] => (Agent 
> Proxy Channel)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_skinny.so] => (Skinny 
> Client Control Protocol (Skinny))
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_h323.so] => (Objective 
> Systems H323 Channel)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_sip.so] => (Session 
> Initiation Protocol (SIP))
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_features.so] => 
> (Feature Proxy Channel)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [skipping chan_oss.so]
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_mgcp.so] => (Media 
> Gateway Control Protocol (MGCP))
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_local.so] => (Local 
> Proxy Channel)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_phone.so] => (Linux 
> Telephony API Support)
> Mar 15 16:24:08 asterisk1 safe_asterisk:  [chan_zap.so] => (Zapata 
> Telephony w/PRI)
> Mar 15 16:24:08 asterisk1 safe_asterisk: Asterisk died with code 1.
> Mar 15 16:24:08 asterisk1 safe_asterisk: Automatically restarting 
> Asterisk.
> Mar 15 16:24:08 asterisk1 asterisk: safe_asterisk startup succeeded
> [root at asterisk1 ~]#
> +++++++++++++++++++++++ END /var/log/messages++++++++
>
>
> ++++++++++++++++++++++/etc/zaptel.conf+++++++++++++++
> [root at asterisk1 ~]# more /etc/zaptel.conf
> # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not 
> hand edit
> # Zaptel Channels Configurations (zaptel.conf)
> #
> loadzone=us
> defaultzone=us
>
> # Sangoma A200 [slot:9 bus:1 span: 1]
> fxsks=1
> fxsks=2
> fxoks=3
> fxoks=4
> [root at asterisk1 ~]#
> ++++++++++++++++++++++END /etc/zaptel.conf+++++++++++++++
>
> ++++++++++++++++++++++/etc/asterisk/zapata.conf+++++++++++++++
> [root at asterisk1 asterisk]# more zapata.conf
> ;
> ; Zapata telephony interface
> ;
> ; Configuration file
>
> [trunkgroups]
>
> [channels]
>
> language=en
> context=from-zaptel
> signalling=fxs_ks
> rxwink=300              ; Atlas seems to use long (250ms) winks
> ;
> ; Whether or not to do distinctive ring detection on FXO lines
> ;
> ;usedistinctiveringdetection=yes
>
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> rxgain=0.0
> txgain=0.0
> group=0
> callgroup=1
> pickupgroup=1
> immediate=no
>
> ;faxdetect=both
> faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no
>
> ;Include genzaptelconf configs
> #include zapata-auto.conf
>
> group=1
>
> ;Include AMP configs
> #include zapata_additional.conf
>
> [root at asterisk1 asterisk]#
> ++++++++++++++++++++++END /etc/asterisk/zapata.conf+++++++++++++++
>
> ++++++++++++++++++++++/etc/asterisk/zapata-auto.conf++++++++++++++
> ; Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not 
> hand edit
> ; Zaptel Channels Configurations (zapata.conf)
> ;
> ; This is not intended to be a complete zapata.conf. Rather, it is 
> intended
> ; to be #include-d by /etc/zapata.conf that will include the global 
> settings
> ;
> callerid=asreceived
>
> ;Sangoma A200 [slot:9 bus:1 span: 1]
> context = from-zaptel
> group = 0
> signalling = fxs_ks
> channel => 1
>
> context = from-zaptel
> group = 0
> signalling = fxs_ks
> channel => 2
>
> context = from-internal
> group = 1
> signalling = fxo_ks
> channel => 3
>
> context = from-internal
> group = 1
> signalling = fxo_ks
> channel => 4
> ++++++++++++++++++++++/etc/asterisk/zapata-auto.conf++++++++++++++
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>