[asterisk-users] Freepbx Incoming call's configuration

[Alex Robar]

Hi Younss,

You just need to setup Inbound Routes in FreePBX. The inbound routes allow
you to route calls based upon caller ID or DID. Since you want to route
based upon the number your caller dialed, you want to route based on DID.
For your example:

1. Create a new inbound route.
2. In the DID field, enter the number you wish to route (555-4570). Keep in
mind that this must match what your provider sends. Some providers send
+15555554570, some sent just 4570, and some send something in between. Check
with your provider for their format.
3. At the bottom, select where you'd like that number to be routed to (I
believe you need to select "Core: Extension 202").

Save the route, apply the settings (via clicking on the red bar), and that's
it!

Alex


On 3/15/07, younss azzayani <younssiga at gmail.com> wrote:
>
> Hi every body,
> I've set up a Trixbox Server with TE110P,all things seem to work
> fine(Thank You Malling lists & irc & Forums), but i need your help,
> i ve 30 numbre from 60 to 89, i need to specify for each sip extension
> a Zap number
> for example to call the sales service the caller must call 555-4570
> and automaticly the caller will be redirected to the 202 ( sales
> service ) so nobody else can use this number ..70
> im using freepbx, so can someone please help me :)
>
> Kind Regards
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Alex Robar
alex.robar at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070315/f08d405b/attachment.htm