[asterisk-users] Packetization Rate

[Matt]

I am currently using 1.2 and can not upgrade to 1.4 until it becomes stable
and we have done much testing with it.

Obviously somewhere in the asterisk code 30ms must be coded... is it set in
just one place, and if so can I set that to 20ms?

On 3/14/07, Dan Austin <Dan_Austin at phoenix.com> wrote:
>
> Matt wrote:
> > To my knowledge, Asterisk's packetization rate is hard
> > coded at 30ms. If I wanted to, where in the code could
> > I go to change it to 20ms. Is there anything bad that
> > might happen if I change it (asterisk related)?
>
> You don't mention what version you are using, but 1.4 does
> support alternate framing (packetization) options on a per
> codec basis.
>
> The feature originally was based on SVN trunk when it was
> still close to 1.2, but I would not want to try to backport
> and support it.....
>
>
> Dan
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070314/8562d2fb/attachment-0001.htm