[asterisk-users] T1 Integrator Birch

[Steve Totaro]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of John Schmerold
> Sent: Wednesday, March 14, 2007 1:35 AM
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] T1 Integrator Birch
> 
> I'm thinking about replacing my Birch T1 integrator with an Asterisk
box.
> 
> The Integrator has 12 voice & 768k data, so the Asterisk box would
> become a router & PBX.
> 
> Has anyone done anything similar, what experiences have you seen &/or
> read about.
> 
> TIA


I tried this with a quad port Digium card a couple of years ago.  It was
not very well documented and I am pretty sure it was not a "supported"
configuration.  It took a lot of digging around to figure out how and
what to enable for the compiling a custom kernel to support the data
mode. 

It may be much simpler now (hope so anyways).  Sangoma seems like it may
be easier to set up, just based on the options in the Sangoma
installation script.

I have no recent experience with it, so please, if you get it working,
post details of what you did, the results and what resources helped you.

Thanks,
Steve Totaro
http://www.asteriskhelpdesk.com
KB3OPB