[asterisk-users] Issues with a Linksys SPA 2102 and asterisk

[Andres]

Erick Perez wrote:

> where to change packet size?

Admin Login -> Advanced

Voice->SIP Tab
RTP Packet Size: .02

>
>
> On 3/9/07, Luki <lugosoft at gmail.com> wrote:
>
>> > Any gurus out there with experience with the SPA 2102 against 
>> asterisk 1.2.14?
>>
>> They work fine with Asterisk; most likely it's your wireless link
>> that's the cause of your problem. The jitter buffer will only affect
>> received audio, i.e. on your side, and since that is fine, you
>> probably don't need to adjust it. Instead try this:
>>
>> 1) Change packet size in increments of 20 ms (i.e. 0.02, 0.04 or
>> perhaps 0.06). Your wireless link may not like too many small packets.
>>
>> 2) Turn off silence suppression if it's on.
>>
>> 3) Try a different codec -- g726-32 or even ulaw to see if it makes a
>> difference.
>>
>> See if that helps.
>>
>> --Luki
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>


-- 
Andres
Technical Support
http://www.telesip.net