[asterisk-users] Polycom Questions

[»Steven Ringwald«]

Doug Lytle wrote:
> »Steven Ringwald« wrote:
>> Any Polycom gurus out there? If so, I have a few config file questions.
>>
>> First off, does anyone have the daylight savings time rules written 
>> for this Sunday's big change?
>>
>> Secondly, if there any way in the config file to tell the phone not 
>> to display the number of missed calls? I don't mind it keeping the 
>> missed calls list, I just don't want that running count.
>>
>> Lastly, I am trying to get the dialplan to work, but have had no luck 
>> so far. I have tried defining it in the sip.cfg and/or the 
>> phone1.cfg, but have had no luck getting the phone to latch onto the 
>> numbers, and immediately dial. I am running with the 2.0.1 firmware, 
>> if that matters.
>>
>> from sip.cfg:
>>
>>   <dialplan dialplan.impossibleMatchHandling="0" 
>> dialplan.removeEndOfDial="1">
>>      <digitmap 
>> dialplan.digitmap="9[2-9]xx[2-9]xxxxxx|91[2-9]xx[2-9]xxxxxx" 
>> dialplan.digitmap.timeOut="3"/>
>
> You're missing your pipes, also using a comma after a 9 will give a 
> simulated second dial tone.
>
>    digitmap="9[2-9]xx|[2-9]xxxxxx|9,1[2-9]xx|[2-9]xxxxxx"

Actually, the pipes in the example above are correct. I want to be able 
to dial:
9nxxnxxxxxx and 91nxxnxxxxxx


>
> The running count can be disabled by looking in the sip.cfg for:
>
> feature.8.enabled="1"
>
> Change it to a 0. 

Thanks. This worked like a charm!

Steve